skunk 2 intake owners, oil cooler fitment question.
 

Im looking into purchasing an oil cooler, mainly the mishimoto unit. my question for skunk 2 owners is, will it fit? given the air box is very close to the oil filter.if anyone is running an oil cooler can you post pick of the routing for the oil feed return lines.or confirm fitment of x kit, whatever you may have.thanks in advance.

I have a custom set up but I used a skunk2 oil sandwich plate, a liquid to liquid core, and I made my own 8an lines. I was just barley able to fit it all in with the intake.

Thanks for the interest in our oil cooler kit! Unfortunately, due to oil filter housing proximity, it does not appear as though there will be enough clearance to run our oil cooler kit (in its current configuration) with this particular intake system. It appears as though most are running a taller spacer to raise the sandwich plate in order to run the lines for larger airbox systems (such as the Skunk2 setup).

Sorry for the inconvenience!

-John