Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Wheel Directory: VIP Modular VRS13 18x10 et20 (https://www.ft86club.com/forums/showthread.php?t=87796)

adamg 05-04-2015 10:00 AM
Wheel Directory: VIP Modular VRS13 18x10 et20
 
Here's my current setup
18x10 et20 with 215/40/18.
BC coils with swift springs
-3 degrees all around
no fender mods

Future
Lower it, roll fenders, and add another degree of negative camber. Then move up to a 225/40 tire.


WARNING:
IF YOU ARE A TRACK GUY AND/OR JUST HAVE POOR TASTE IN DESIGN LIKE @tahdizzle THIS THREAD ISN'T FOR YOU
https://farm9.staticflickr.com/8884/...27ecabd1_c.jpgIMG_4986 by adamgott21, on Flickr

https://farm8.staticflickr.com/7763/...6000fa69_c.jpgIMG_4993 by adamgott21, on Flickr

https://farm9.staticflickr.com/8813/...92af65e0_c.jpgIMG_4989 by adamgott21, on Flickr

https://farm9.staticflickr.com/8696/...a7a505f1_c.jpgIMG_4980 by adamgott21, on Flickr

toast 05-04-2015 12:28 PM
What is the point of 10" wide wheels when your tire has a contact patch 2" narrower?

DavidBob 05-04-2015 12:30 PM
225's are gonna look dope man, so far so good

Timmy_Jones 05-04-2015 12:36 PM
Cool to see some different wheel styles, but those tires look absurd. You should be running at least a 245, that would look reasonable.

The offset doesn't make sense either, even accentuates the tire size not being correct.

I like the taillights at least.

adamg 05-04-2015 01:10 PM
Quote:
Originally Posted by toast (Post 2236564)
What is the point of 10" wide wheels when your tire has a contact patch 2" narrower?
Quote:
Originally Posted by Timmy_Jones (Post 2236577)
Cool to see some different wheel styles, but those tires look absurd. You should be running at least a 245, that would look reasonable.

The offset doesn't make sense either, even accentuates the tire size not being correct.

I like the taillights at least.
whats the point of having a 10" contact patch. i dont race or drift. so why cant i run wheels with 4inch lips. a 245 would be nice and im considering doing a meaty fitment but i already had these tires and until im running -6 or so all around a 245 wont fit

6-Shift 05-04-2015 01:56 PM
So much hate!

Looks awesome man, time for some rear lower control arms to dial in the fitment!

adamg 05-04-2015 01:58 PM
Quote:
Originally Posted by 6-Shift (Post 2236703)
So much hate!

Looks awesome man, time for some rear lower control arms to dial in the fitment!
have spc arms in my garage. these pics were just throwing the wheels on. ill update pics when i put the LCA's in, lower it and add a little more camber

Timmy_Jones 05-04-2015 02:19 PM
Quote:
Originally Posted by adamg (Post 2236621)
whats the point of having a 10" contact patch. i dont race or drift. so why cant i run wheels with 4inch lips. a 245 would be nice and im considering doing a meaty fitment but i already had these tires and until im running -6 or so all around a 245 wont fit
Then don't buy the wheels? Buy something that fits. I bet in a reasonable width with matching tires, or even tires that fit those wheels and a dialed in suspension setup it wouldn't look bad.

I wouldn't run diesel stacks on my car, its not a diesel.

NAISU86 05-04-2015 02:26 PM
Wow looks great!


Sent from my iPhone using Tapatalk

adamg 05-04-2015 02:46 PM
Quote:
Originally Posted by Timmy_Jones (Post 2236745)
Then don't buy the wheels? Buy something that fits. I bet in a reasonable width with matching tires, or even tires that fit those wheels and a dialed in suspension setup it wouldn't look bad.

I wouldn't run diesel stacks on my car, its not a diesel.
These were custom built to my desired spec, take your off the shelf wheels and attitude out of my thread

Charky 05-05-2015 01:40 AM
Loving the car nice

chiefshayan 05-05-2015 01:57 AM
Quote:
Originally Posted by adamg (Post 2236802)
These were custom built to my desired spec, take your off the shelf wheels and attitude out of my thread
I lol'd

Vten 05-05-2015 10:03 AM
Looking good , dude !!

Finally Got my car back last night from the shop and we should do some photoshoots !

adamg 05-05-2015 10:17 AM
Quote:
Originally Posted by Vten (Post 2237825)
Looking good , dude !!

Finally Got my car back last night from the shop and we should do some photoshoots !
Thanks man! yea we should! i think i might lower it this weekend, ill hit you up


All times are GMT -4. The time now is 12:31 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.