port installed spring and roll bar for BRZ
 

So the SCCA has approved, for the FRS, the port installed spring and sway bar option. the Toyota part #'s are Spring PTR07-18130 and TRD Sway Bar Kit P/N PTR11-18130. These parts are "legal" for CS in Auto cross.

Does anyone know if there's a similar port installed option for the BRZ? I looked and can't find anything. I'm hoping the collective can come up with something, cuz i can't afford to switch brands right now.

dan

There is not. The BRZ will likely get left out.

Petition the SCCA.

Or petition Subaru.

Both pointless.

-alex

Sell the BRZ and buy the FRS.

Or start modding for STX, CSP or SM class.

I would imagine if the TRD springs are legal, a case could be made that the STI pink springs should be legal. Not sure how receptive the SCCA would be though.

I think a better case could be made to make the Eibach prokit legal since the TRD springs are just a red prokit.

Really the petition would be to install the TRD kit on the BRZ, they are the same cars mechanically. However there isn't really a precedence for it, and I give it about a .00001% chance of happening. If you want to use the parts in CS, you will probably need to get a FR-S.

I remember dealing with the same issues with a first gen Rx7, just for small variences between years & model differences in the front facia.

another option would be for you to rebadge the car entirely to a FRS, and swap the front end.

Cheaper than swapping cars. Just don't let anyone see your VIN plate.

-alex

"If you're not cheating, you're not trying hard enough to win.” -Marty McSorley

Or just tell them it's actually an FRS with a BRZ front end swap :D

Has that been proven or just a guess...'Cause nobody seems to have any hard data on the spring rates...