Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   DIY (Do-It-Yourself) Guides (https://www.ft86club.com/forums/forumdisplay.php?f=43)
-   -   DIY: LED Logo Projector Door Lights (https://www.ft86club.com/forums/showthread.php?t=87002)

wedwards98 04-20-2015 04:20 AM

DIY: LED Logo Projector Door Lights
 
1 Attachment(s)
Hey everyone,

I recently installed some sweet LED door projector lights in my car and thought I would make a quick tutorial in case anyone else is looking to do the same. The install is super easy, especially if you have a courtesy door light already (if you don't the wiring is a little more intensive, but still doable).

Tons of Logo options available (BRZ, Subaru, TRD, Toyota, 86 Logo, etc) or you can order custom ones with anything. I'm a nerd so I went with the bat symbol :)

Anyway, I put the DIY tutorial in the attached PDF. There are lots of pictures in it to walk you through it. Check it out if you are interested!

https://fbcdn-sphotos-h-a.akamaihd.n...40148035_o.jpg

elyugi1 04-23-2015 01:19 AM

That looks sweet how did you do it?were did you get them from??

SR5 04-23-2015 01:58 AM

:eyebulge: holy bat light!..

DESTINY-BRZ 04-23-2015 08:58 AM

BRZ LOGO
 
2 Attachment(s)
I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.


INSTALL TOOK ME 5MIN PER SIDE

adrixe 04-23-2015 08:19 PM

Interested in that! Let me know.

funwheeldrive 04-23-2015 08:37 PM

That's pretty cool. Too bad the FRS doesn't have it.

wedwards98 05-03-2015 12:18 AM

Quote:

Originally Posted by elyugi1 (Post 2223659)
That looks sweet how did you do it?were did you get them from??

Thanks, they are pretty easy. Pretty much just cut the hole in the bottom of the door panel and wire it to the courtesy lights. Check out the pdf I posted in the original post for the full details.

I bought mine off ebay for cheap, but there are tons out there. These are the ones I got: http://www.ebay.com/itm/151222154525...%3AMEBIDX%3AIT

wedwards98 05-03-2015 12:20 AM

Quote:

Originally Posted by funwheeldrive (Post 2224903)
That's pretty cool. Too bad the FRS doesn't have it.

You can actually do it on the FRS as well, it just takes a little more effort if you don't have the courtesy light to tap into. You will have to wire it over to the door switch.

Here's a video how if you are interested:
[ame="https://www.youtube.com/watch?v=C0lTXk85Ezs"]https://www.youtube.com/watch?v=C0lTXk85Ezs[/ame]

DESTINY-BRZ 05-03-2015 01:39 AM

No cutting just replace door light

sactownbwoy 05-12-2015 04:21 PM

Quote:

Originally Posted by DESTINY-BRZ (Post 2223859)
I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.


INSTALL TOOK ME 5MIN PER SIDE



That's what I want. So much easier then dismantling the door. Where did you get them?

mattyd97 11-16-2015 11:44 AM

Quote:

Originally Posted by DESTINY-BRZ (Post 2223859)
I HAVE AN EXTRA SET. IF ANYONE WANTS THEM. MAKE AN OFFER! JUST SHOOT ME A TEXT 7322398708

WILL CAN DO A PAYPAL DEAL

THEY ARE PLUG AND PLAY.


INSTALL TOOK ME 5MIN PER SIDE

Still have them?

dnieves 11-29-2015 11:09 AM

Crap! Too bad the FR-S isn't pre-wired. I would be happy with just the OEM red light in the door. It's easy but the last thing you want to introduce (especially under warranty) is a potential short circuit.

texasbound972 11-29-2015 11:43 AM

http://blog.curran-connors.com/wp-co...rcuit-meme.jpg

https://d1juqo69tkizbw.cloudfront.ne...93d9.large.jpg


All times are GMT -4. The time now is 10:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.