Center Cap to fit RFP1
 

I've seen a custom 86 one, I like the flush look. The Enkei ones stick out a bit.

what center cap(s) fit the Enkei RFP1?
Thanks!

I have seen most use Honda accord/crv/civic center caps. you sand them down and paint them. if you google it you will find examples with part numbers.

I am also looking. According to google, the only center caps that fit RPF1s are the ones that come with them or some stock model Honda caps. I have found DIY stuff all over but nothing that just fits. I just bought (4) 2" knockout closures from the electrical department at Lowes/Home Depot and they fit great. I am planning on carbon fiber wrapping them then putting on the stickers I found on ebay (shown below) on top of that.

Here is what I bought from home depot:
https://lh3.googleusercontent.com/J8...w310-h207-p-no

Here is the center cap sticker I am putting on it:
https://lh3.googleusercontent.com/y6...w215-h207-p-no

found the Honda solution one.
http://forums.nasioc.com/forums/show....php?t=2353065

Honda part#44732-S9A-A00

My finished product.

https://lh5.googleusercontent.com/-k...o/IMAG0763.jpg

looks nice and flush!

I bought a knockout from h-depot but it has
https://www.elliottelectric.com/Inve...110_TE_002.jpgjagged edges and it feels kinda heavy. I'm reluctant to something on it ..think I'd rather have plastic caps.

Here is a thread my friend made ages ago xD

http://www.iwsti.com/forums/gr-tires...nter-rims.html

Personally I just grabbed the caps off my Honda pilot and painted them black so they match my black wheels... Really makes my r40 lugs stand out!

64MM Is the ID of the hole in the wheel. There is a great eBay seller who I've purchased from who does good caps with a variety of logos.








I like how it turned out on mine....