FS: FBM Base kit w/2871r - No Manifold/BOV - SOLD
 

Hey guys. I bought this kit from Sterz almost 6 months ago, went to fit it to my car about 4 months later and the manifold didn't fit. I sent it off to FBM and LJ told me that "someone modified this header and we can't warranty that work." Understandable. He suggested I shitcan the manifold and just buy a new one, but I figured that I'd be able to make my own and utilize the parts from this kit.

Well, fast-forward two months and I've built my own kit and won't be utilizing anything from this base kit other than the turbo or the FMIC, so I figured I'd sell the kit and just buy a different turbo/FMIC.

Now, I realize this kit isn't going to be that desirable for basically anyone, but it's of literally no use to me. Make me an offer and let's get this thing sold.

What DOES come in the kit:
FBM Base Intercooler Piping
FBM Base Intercooler - Dinged during shipping, but where it's hit lies behind the bumper beam/out of flow anyways. I pressure tested the intercooler to 50psi, way more than you'll ever efficiently pump through this thing and there are no issues.
Water lines - They're damaged. Arrived that way, need to be replaced. The fittings should still function, just the rubber hose that needs to be replaced.
Oil return
Garrett GT2871r turbo - Looks like it's in excellent condition, but two of the fins have marks on them (marked by the previous owner with a Sharpie). It worked just fine and won't cause issues.
FBM Base down pipe - Wrapped, good condition
All silicone couplers, all new gaskets throughout, a new wastegate valve seal, all hardware you'll need to bolt everything together
ECUtek Cable and Dongle
FBM 550 and 1000cc injectors - 1000's have the PnP adapters on them, 750's don't need them
Wastegate Springs
Dump Tube
Precision Wastegate - Unknown wastegate setup currently
TiAl BOV block off plate - The BOV I received was damaged, so instead of replacing it I just made a block off plate
Electronic Boost Control Solenoid
FBM 270lph fuel pump


To get this kit up and running on your car, you'll need: Water lines, oil feed line, return oil line/welded oil pan, and a FBM Base Manifold, and a 3" air filter (also damaged during shipping), so keep that all in mind when you offer a price to me. Like I said, I know this kit isn't desirable except to a very small segment of the community, but that's why I'm asking so little for the kit. Get yourself a new manifold and have a good turbo kit at a low price.

http://img.photobucket.com/albums/v3...ps4zczrzjs.jpg
http://img.photobucket.com/albums/v3...psfkpe9syt.jpg
http://img.photobucket.com/albums/v3...pszpyxidlp.jpg
http://img.photobucket.com/albums/v3...ps8rpvdk31.jpg
http://img.photobucket.com/albums/v3...psy11nelfi.jpg
http://img.photobucket.com/albums/v3...psjyodsxic.jpg
http://img.photobucket.com/albums/v3...psd1cz2nid.jpg
http://img.photobucket.com/albums/v3...psfprlhtyf.jpg
http://img.photobucket.com/albums/v3...psw594oapp.jpg
http://img.photobucket.com/albums/v3...psnikrww8i.jpg
http://img.photobucket.com/albums/v3...ps2hzfljkv.jpg
http://img.photobucket.com/albums/v3...psjzo4ypdi.jpg
http://img.photobucket.com/albums/v3...psjfxam3gf.jpg
http://img.photobucket.com/albums/v3...psoq1zlwhf.jpg
http://img.photobucket.com/albums/v3...pssbx5bjjm.jpg
http://img.photobucket.com/albums/v3...psixnj8ffm.jpg
http://img.photobucket.com/albums/v3...psfbtflhd1.jpg
http://img.photobucket.com/albums/v3...pszn4dan04.jpg
http://img.photobucket.com/albums/v3...psiopgvfpo.jpg


$1750 Shipped, and I am not parting anything out from this kit.

:thanks:

Definitely jumping the gun on all of this because you may find a buyer. Would you sell the Cable and Dongle separate? If so PM me a price and I can probably take it off your hands.

If the potential buyer is looking for a welded pan with oil return and oil feed line, I'll have one to part with very soon.

Hope this helps with your sale.

Interested will have to price out some things first. I'll let you know tonight

Sorry my friend, but I can't let the cable and dongle go from this kit. I need all of the parts I can get to make this as appealing to the next owner as I can. Good luck in your search though.:thumbsup:

I appreciate you looking out. Is your pan/feed line for the FBM kit?

Just keep me in the loop. No hard feelings if you don't want to go for this. :)

Price for 1000cc Injectors

Need fans and fuel pump too I'm guessing ?

Not parting this kit out, sorry.

Fans were not included when I bought the kit, and I'm not sure if you can get away with running the factory fans on this kit, but I was planning on buying some SPAL fans and replacing the stock units.

I forgot to include it in the first post, but it also includes FBM's 270lph fuel pump.

Yes, it is compatible :)

How much for the pan?

Let's bump this back up.

Since it wasn't in the pictures I went in search of the fuel pump, and it's MIA.

If i had the money, would be on this in a second. Glws, Bump.

Bump. I'm leaving the country on Sunday so unless someone gets it today and I can ship it today/tomorrow, it'll have to wait until the last week of April, when I return.

Interested but cost of manifold scares me. Also want a kit that can run on stock fuel system