Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Electronics | Audio | NAV | Infotainment (https://www.ft86club.com/forums/forumdisplay.php?f=27)
-   -   Using Factory USB port with Aftermarket HU (https://www.ft86club.com/forums/showthread.php?t=8595)

ruskymx 06-13-2012 12:48 AM

Using Factory USB port with Aftermarket HU
 
I came across this when I was searching about using the factory USB port with an aftermarket deck. I want to install either a Pioneer AppRadio 2, which I already bought and I have sitting in my dining room, or a AVIC-X940BT. I've been second guessing myself after buying the AppRadio 2 and I'm thinking about returning it and getting the 940BT. Actually, I'm pretty sure that's what I am going to do.

Anyway, here's the link to the write up to be able to use the factory USB port. It's done on a Tacoma, but the port looks like it is the same so it should work.

http://www.tacomaworld.com/forum/aud...head-unit.html

I just need to figure out how to use the factory mic with the Pioneer unit and I'm set. I would rather not have a second mic in the car if I don't have to. From my searching, this seems like it's going to be the hardest part.

Ruskymx

keithbribac 06-13-2012 12:11 PM

I just did this mod 2 days ago. Usb and aux works good with my pioneer 8400. I would like to know how to use the factory mic as well

Mblanchard 06-13-2012 07:22 PM

Frs
 
How did you get the aux to work?it plays video through this.did you wire up the usb or hot glue it in?

keithbribac 06-13-2012 08:09 PM

Quote:

Originally Posted by Mblanchard (Post 256759)
How did you get the aux to work?it plays video through this.did you wire up the usb or hot glue it in?

http://www.scionlife.com/forums/showthread.php?t=207173

I used this guide. Everything works. Aux does not play video, only through usb. I used gorilla glue to glue the usb plug in place.

Cessblood 06-14-2012 10:58 AM

I have the AVIC-X940BT too. I might install mine this weekend.

DYOLF26 06-14-2012 07:34 PM

Quote:

Originally Posted by Cessblood (Post 257767)
I have the AVIC-X940BT too. I might install mine this weekend.

Hey I'm looking into getting the same Pioneer head unit. I'm curious to know where you got yours from? On their website they retail at $999 but i see them on Ebay new right at $600. Did you find it cheaper anywhere else? Also do you know if you need additional parts for it to play video while car is moving?

Thanks in advance ha.

ruskymx 06-15-2012 10:31 AM

You will need Metra 70-1761 wiring harness ($5.39 w free S&H), Metra 95-8202 mounting kit ($10.75 w/ free S&H), and Scosche LSAAB Antenna adapter ($9.55 w/ Free S&H).

I didn't buy the 940BT yet, but eBay and Amazon have it cheapest. If you have an Amazon Rewards credit card, I think you can get an additional 3% in points to use towards future purchases. If you open a new account, they'll give you $30 instant gift card. eBay will give you 2% back in eBay Bucks. Since I don't want another credit card, I'm probably going to buy it from eBay. I have $11+ in eBay Bucks now and this would give me another $12. I'll be able to buy something in July for about $23 off.

If someone wants to buy from Amazon, I have a link on my blog (link in sig) ;) :thumbsup:

Ruskymx

Scooby 06-15-2012 10:58 AM

Quote:

Originally Posted by keithbribac (Post 256000)
I just did this mod 2 days ago. Usb and aux works good with my pioneer 8400. I would like to know how to use the factory mic as well

Can you show us a pic of how it looks installed? Thanks.

keithbribac 06-15-2012 03:58 PM

Here you go
http://i3.photobucket.com/albums/y60...615_134900.jpg
http://i3.photobucket.com/albums/y60...615_135019.jpg

Scooby 06-15-2012 05:13 PM

Quote:

Originally Posted by keithbribac (Post 260096)
Here you go

Thanks :-) but I actually meant the head unit.

keithbribac 06-15-2012 07:23 PM

http://i3.photobucket.com/albums/y60...606_143521.jpg

DYOLF26 06-16-2012 06:55 PM

Quote:

Originally Posted by ruskymx (Post 259634)
You will need Metra 70-1761 wiring harness ($5.39 w free S&H), Metra 95-8202 mounting kit ($10.75 w/ free S&H), and Scosche LSAAB Antenna adapter ($9.55 w/ Free S&H).

I didn't buy the 940BT yet, but eBay and Amazon have it cheapest. If you have an Amazon Rewards credit card, I think you can get an additional 3% in points to use towards future purchases. If you open a new account, they'll give you $30 instant gift card. eBay will give you 2% back in eBay Bucks. Since I don't want another credit card, I'm probably going to buy it from eBay. I have $11+ in eBay Bucks now and this would give me another $12. I'll be able to buy something in July for about $23 off.

If someone wants to buy from Amazon, I have a link on my blog (link in sig) ;) :thumbsup:

Ruskymx

Thanks a bunch! Especially for listing off all the part numbers for the wiring harnesses and such. This will definitely be my second addition to my Raven FR-S when it is delivered, after tint of course. :)

encity5 06-17-2012 12:04 AM

sorry if this question is a little obvious, but I want to replace my stock unit with the X940BT as well. The parts you listed about, (wiring harness, mounting kit, LSAAB antenna adpater)

What exactly do i need them for? I was going to buy the unit soon, but it sounds like before i can install it, ill obviously need more than just the headunit itself. How simple is it to wire everytihng together?

Any help is appreciative, thanks, just trying to learn more about this stuff

ruskymx 06-17-2012 10:27 AM

Quote:

Originally Posted by encity5 (Post 262221)
sorry if this question is a little obvious, but I want to replace my stock unit with the X940BT as well. The parts you listed about, (wiring harness, mounting kit, LSAAB antenna adpater)

What exactly do i need them for? I was going to buy the unit soon, but it sounds like before i can install it, ill obviously need more than just the headunit itself. How simple is it to wire everytihng together?

Any help is appreciative, thanks, just trying to learn more about this stuff

The wiring harness is needed so you don't have to chop your factory harness up and makes it so much easier to wire everything up correctly. The mounting kit is needed to fill the gaps along the sides of the radio because most aftermarket radios won't be as wide as the original. The antenna adapter is needed so you can hook up the radio antenna to the 940BT. Without out this, it's like trying to fit a square peg into a round hole

Ruskymx


All times are GMT -4. The time now is 12:26 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.