Rocket Bunny v2 LED DRL kit. Help Needed!
 

Okay so I am a few days away from installing my Rocket Bunny v2 front bumper, but can't seem to figure out the wiring for the LED kit.. Has anyone figured it out or can guide me on which wires to use / wont use?

Here are some pictures.

Attachment 105989

Attachment 105990

Got to love that color typo....


Essentially, it is three main lines coming out of the one power box as seen below.

The Red and black are obvious, but where do the Green, Brown, White, Yellow, and Gray lines go?
Attachment 105991

Attachment 105992



I ALSO have the instructions in PDF format in high res if anyone can translate them from Japanese to English.


Any insight would be greatly appreciated!

Japanese Instructions:


Attachment 105993








Attachment 105994

Did you ever get more info on this?

Alternate wiring for rb v2 drls
 

So I know this is not preferred but I nixed the relay box and wired the positive and negative to the drl lights in the spyder headlights I have. Ran a fuse with the positive wire. I don't know much if your lights are stock because I got rid of those a while ago. Mine turn on with the light switch turn halfway by the steering wheel. My problem was the relay box itself was malfunctioning and I didn't want to purchase another. I have 2 other friends who have also had problems with the relay boxes. May be the issue, may not be. I know it was for me because they worked for about 30 seconds and would work when I opened the box and messed with the motherboard. Idk what you want to do but this is just a way around the system provided.

On another note, has anyone found these LED'S in another color besides orange or white? Maybe blue?