Need Fenders rolled somd
 

Need my rear fenders rolled due to the lip rubbing on my tires when hitting decent bumps(aftermarket wheels+lowered). Anyone in somd that does decent work?

buy a roller for like $80

I had mine rolled at MachV in Sterling, VA. Could also have Ptuning or a local performance shop do it. Would run you about 150 I think.

Moar camber(there isn't much material to roll inside the fender)

what if he wants tight fitment. more camber is good but too much depending on wheel specs will just make them look sunk

Well since rolling will only pick up around 1/16 of an inch... doesn't seem very useful. He could use skinnier tires but I figured he wouldn't want to buy new ones just for this. Roll it and add camber until it doesn't rub. Not a whole lot of options here

the fender if pretty thick in the rear, and there still a good amount up front. he never said if he was rubbing front or rear and he didnt say how much was rubbing. maybe a 1/16 of an inch is all it takes

Maybe it is. Maybe it isn't. So I guess neither one of us can be right until we have more information