Greddy oil cooler coming soon
 

86/BRZのオイルクーラーキット近日発売予定です。
— at スーパーオートバックスTOKYO BAY 東雲.

mods can we move this i put it wrong area i think.

Great stuff..

I am wondering if they had to custom made the sandwich block for the oil cooler hoses given the BRZ has a "cup" for the oil filter.

For sure this will be on my buying list when its launched! :)

In for details! Anything worthwhile to translate?

Comes with a nylon mesh hose, cools by 8C which is 8 X 1.8 + 32 = 46.4F. It sits in front of the radiator and increases oil capacity from 5.2l to 6l. I will translate more, but moto P may be better at this...My 11 years in Japan did me a lot of good, but I can only read about 500 Kanji and that is the meat of most writing in Japanese. If I come up with more I will edit and add...Living in Arizona I will definitely get this.

Ok...I dont think it sits in front of the radiator...I believe it sits to the side of it.
It's a 10 row cooler and the block spacer is standard so its connections are standard.

Thats all I got. I speak it better than I read it. If anyone is better at this than I please do correct me.

I do believe it would lower the temp. by about 14 degrees fahrenheit not by 46 or your oil would never reach operating temperature. The formula you used doesn't apply in this case - no need to add the 32.

Look here: http://www.ft86club.com/forums/showthread.php?t=14062
Cheers
HKS Australia

8 degrees celcius is 46.4...the link above is info for the HKS cooler, didnt see anything other than someone mentioning Greddy had one...so relevance?

Last time I looked it has the GReddy kit on there as well?
Cheers
HKS Australia

8°c is 46.4°F when you are talking straight ambient temp. When you are talking about a relative change, in this case, lowering the temps by 8°c, then jpit is correct.

This system will lower oil temps by 8°c or 8*(9/5)=14.4°F.

Lowering it 46.4°F would not only kick it out of the efficient range for the engine, but also be completely impractical.

My bad on the numbers conversion...It would be 8c x 1.8 = 14.4F which is how much it would lower the temps by.

Regradless I am interested living here in Arizona. Our cars are brutalized by the heat.

tight

anyone know specifics on the thread pitch, etc on the sandwich plate? I'm not really interested in an adapter that doesn't include a thermostat. I'd like to use their spacer, but will go another way unless they release a tstat.