Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   Passenger door raddle and squeak coming from around speaker (https://www.ft86club.com/forums/showthread.php?t=84061)

Peschi 03-07-2015 08:57 PM

Passenger door raddle and squeak coming from around speaker
 
Hey guy!
I have a 2013 BRZ Limited with 20k on it.
Since I got it I have been hearing a squeak or raddle from the door/speaker area.
When the passenger puts minimal pressure on the speaker grille the sound goes away.
Does any one have any suggestions?
Thanks!

stevesnj 03-07-2015 09:13 PM

Pop the grill off and tighten the spaker screws. They could just be lose or the grill itself could have an issue.

navanodd 03-08-2015 12:42 AM

Its the window switches themselves. If you pop the doorcard and unscrew the switches, you can take them right out and see part of the window switch moving around from the underside. A little foam stuffed in the grooves fixes it completely.


As a side effect, you will likely notice a big improvement in sound quality.

Turbo95eg6 03-08-2015 05:21 AM

I didn't even know raddle was a word. But I'm sure you meant rattle.

Tcoat 03-08-2015 05:28 AM

Quote:

Originally Posted by stevesnj (Post 2160184)
Pop the grill off and tighten the spaker screws. They could just be lose or the grill itself could have an issue.

Well played!
Subtle yet effective.

Peschi 03-08-2015 11:50 AM

Quote:

Originally Posted by navanodd (Post 2160330)
Its the window switches themselves. If you pop the doorcard and unscrew the switches, you can take them right out and see part of the window switch moving around from the underside. A little foam stuffed in the grooves fixes it completely.


As a side effect, you will likely notice a big improvement in sound quality.

thanks!

I'm not sure what/where to look for window stitching.

Could you give me a quick run down as to how I could accomplish this?

navanodd 03-08-2015 03:58 PM

Quote:

Originally Posted by Peschi (Post 2160544)
thanks!

I'm not sure what/where to look for window stitching.

Could you give me a quick run down as to how I could accomplish this?



http://www.ft86club.com/forums/showthread.php?t=12520


That post has enough info to get you to the switches. 4 screws hold the switch on. Once you have the switch out its easy to see where to put the foam.


All times are GMT -4. The time now is 09:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.