Greddy widebody v1 help!!
 

Here's my situation. I just slapped on my widebody greddy fenders...I want to run 18x9.5+12 (or 20) gramlight 57xtreme. They are 114.3 ...

I am interested in the megan hub conversion but I am 100% thrown on what to do...

Rears: what rotor can I get? I don't want to redrill...
do I need brakes?? ( I don't want to buy $3k brakes... )

Fronts: Can I just buy rotors? If so which ones?
do I HAVE to buy brakes??

It says I can run 2012+ legacy brake kit but I cannot find any. Any suggestions? Do I need to swap out the rear brakes if I do the fronts?? I really just want to remain on stock brakes...

Also what wheel spacers am I to need for the greddy fenders...maybe going 1-3 degree camber...nothing serious. 18x9.5+12 or +20 with 235/40/18

...suggestions? Thanks.

It's best if you post this in the suspension/hub/brakes section of the forum since this is mostly related to the suspension.

I'll try not to be an ass...
First of all I'd say get wheels that fit instead of buying spacers to fill your fenders.
If you are dead set on those wheels and you decide you are going to need to get spacers anyways, just get 5x100 to 5x114.3 conversion spacers because it seems like you are on a budget. That way you won't need new rotors, brakes, anything...just bolt the spacers on and you are good. However it is kind of the cheap way of doing things...

Also... this website is your best friend
http://www.1010tires.com/Tools/Wheel-Offset-Calculator