OEM radiator - help reinstalling
 

Hi all-
My robispec cooler recently started leaking. I'm going back to the OEM radiator for now, but have a quick question on how it bolts to the AC condenser.

I don't know if I'm missing a bracket, or what. It's been a few years, so I don't remember. I found this online, and am wondering if that's what I need (see parts 88463A/B in the diagram):
http://www.scionautopart.com/showAss...57-8718-264410

Here's my OEM radiator. You can see I have a gap between the radiator and condenser that needs some sort of bracket/brace. Is the above the correct parts?

https://c1.staticflickr.com/9/8655/1...b6568f48_z.jpg
Thanks!

Those 2 brackets are the correct parts, 4 total needed.

Thanks!!! I know you went through the same thing :)

Luckily I kept my stock radiator and parts so still had my brackets.
Also dumped my ROBISPEC radiator.

Mishimoto radiator doing well now with oem rubber hoses. Silicone ones would never fit tight enough that fluid would seep out even with t-bar clamps.