Errors while logging
 

Keep getting multiple pop up errors while trying to log with Ecutek. I have the latest software and can log some. The errors just pop up randomly and as I'm busy driving I can't capture them. Anyone wanna ride along? :)

What errors are you getting? Rom cal ID?

OBD errors

crook cable or obd port pins socket issue, check car socket for pushed back pins.

try cable in another vehicle

logging to many parameters can overload ecu

As in CEL or on the laptop? If laptop, can you post the exact error?

Have you got anything sucking large amounts of juice plugged in? I found that electrical surges/changes, like plugging in/out my laptop charger would cause logging errors. Alternatively I'd suggest the same as above. Is the LED n the cable solid?

The LED is solid green. Flashes red soon as I open rom like it's reading it. Normally as soon as I hit 4kish the pop up happens and the log stops. Never been able to log above 5k rpm.

@Kodename47

Map Access Error: Not 0x10 or 0x00: then a whole bunch of numbers.

Happens as soon as I hit 3k rpms in any gear.