RomRaider
 

Ok Ok :iono:

I've searched for the last hour. Can SOMEONE help me get my Romraider setup properly? I got it installed, but I can't get it to open anything. WHAT in THE blue hell am I not doing right?

:mad0260:

Probably not added a definition file. First important question, tactrix or Oft?

OFT @Kodename47

use romraider defs that come from OFT site for your tune make sure you use oft definition for v1 or v2 tunes depending on which tune you are running , use the def that matches your rom type

DO NOT USE DEFS FROM ROMRAIDER GITHUB SITE WITH OFT TUNES


read tune tweaks post below

So do I load the defs, then open a map?

yes, you only need to load the one def corresponding to your oft rom calid

the definition tells romraider where the tune tables are located in the rom hex code, the locations are different for each rom type.

Standby. I'm new to this. I will say ty in advance because this is the first forum that's been nothing but helpful to me. When I was on ls1 tech they were mostly a-holes

no problem mate

just take it slow and get used to romraider and what tables look like before you start changing anything, if the tables look weird or corrupted something is incorrect dont flash the rom.

read here as well
http://www.ft86club.com/forums/showthread.php?t=79152


then probably read the rest of the links relitive to oft below

You have to link the definitions file through romraider. I think it is in setup top somewhere.

I finally got it that night.

update. so i used this Virtual Dyno thing. got it set up somewhat proper... on E85 stg2 EL tune with fresh oil and air filter... Do those estimated numbers look right? lol curve looks proper, rpm doesnt...

http://i.imgur.com/rrmLnNp.jpg

http://datazap.me/u/itsjustdavep/roa...ata=0-1-2-4-13

Have the software but I can't load defs. Am I missing a step?

You upload the defs (XML files) from OpenFlash supplied in the folder, not the one that's in RomRaider's folder. Make sure the cal matches or it won't open when you use your original stock file. Load the XML def based on your CAL and then open it with your stock tune that OpenFlash Tablet has stored and it should open. Do you know your CAL ID number?

Do you go to the Orlando 86 weekly meets? (on facebook). I'm sure someone there could help you.