Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)
-   -   advance multiplier = 0 why???? (https://www.ft86club.com/forums/showthread.php?t=81518)

agent47 01-28-2015 03:11 PM
advance multiplier = 0 why????
 
2 Attachment(s)
I just recently got an oft and flashed to stage one. I've taken logs with stock tuning and stage 1 v2.06x 93 octane. In both logs the adv multiplier stays at 0. From what I've been reading this should stay at 1 correct? If it drops less than 1 it indicates that you might be running bad gas. In my case it doesn't move at all. Any help in understanding this is appreciated.

Btw its a 2015 FRS 6mt

Kodename47 01-28-2015 03:28 PM
Quote:
Originally Posted by agent47 (Post 2108985)
I just recently got an oft and flashed to stage one. I've taken logs with stock tuning and stage 1 v2.06x 93 octane. In both logs the adv multiplier stays at 0. From what I've been reading this should stay at 1 correct? If it drops less than 1 it indicates that you might be running bad gas. In my case it doesn't move at all. Any help in understanding this is appreciated.

Btw its a 2015 FRS 6mt
Probably not supported on your Cal ID, what is it?

agent47 01-28-2015 03:32 PM
ZA1JD00C

Kodename47 01-28-2015 03:46 PM
Yesterday:
http://www.ft86club.com/forums/showthread.php?t=81445

agent47 01-28-2015 03:49 PM
Thanks

Shiv@Openflash 01-28-2015 04:15 PM
We released an update for D00C last his morning. Just connect your OFT to OF manager and let it run updates. Then check to see if you can log adv multiplier successfully :)

agent47 01-28-2015 04:28 PM
Quote:
Originally Posted by Shiv@Openflash (Post 2109102)
We released an update for D00C last his morning. Just connect your OFT to OF manager and let it run updates. Then check to see if you can log adv multiplier successfully :)
Awesome thanks!

agent47 01-28-2015 04:47 PM
I just confirmed it's fixed, thanks again!

Shiv@Openflash 01-28-2015 05:01 PM
Quote:
Originally Posted by agent47 (Post 2109155)
I just confirmed it's fixed, thanks again!

Great. Can you check to see if MAF voltage is logging correctly too?

agent47 01-28-2015 05:10 PM
1 Attachment(s)
Quote:
Originally Posted by Shiv@Openflash (Post 2109181)
Great. Can you check to see if MAF voltage is logging correctly too?


I think so but here's a log of idle and stationary revs. I'm new to this and don't know too much about what I'm looking at.

Shiv@Openflash 01-28-2015 05:48 PM
Quote:
Originally Posted by agent47 (Post 2109195)
I think so but here's a log of idle and stationary revs. I'm new to this and don't know too much about what I'm looking at.
Yep! Looks right. MAF Voltage logging is now confirmed to work on D00C. Thank you for the log :)

SoCalArgento 01-29-2015 12:11 AM
New to OFT Tuning; what's the difference between v2.06x and v2.07x? Both of those appear on the file I downloaded from oft website.


-Thanks


Sent from my iPhone using Tapatalk


All times are GMT -4. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.