Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Spec d headlights (https://www.ft86club.com/forums/showthread.php?t=81472)

FRSNewb 06-15-2015 09:05 AM
Quote:
Originally Posted by Ornelas66 (Post 2286457)
What is the difference between the H-1 and the D2S bulbs? I thought the Spec D lights HAD to have the H1 light bulbs if you wanted to have HID lights.
Quote:
Originally Posted by Jake_86 (Post 2286987)
D2S bulbs do look like they have the proper fitment (witht he little notch cut out)
There is 0 difference when it comes to proper fitment, both fit into the lights.

Jake_86 06-15-2015 12:15 PM
Quote:
Originally Posted by FRSNewb (Post 2287102)
There is 0 difference when it comes to proper fitment, both fit into the lights.
i cant get the h1 to fit at all really. the black plastic part (which is slightly more than a half circle on H1) is too small to get caught by the clips. did you use h1 yourself? can you sneak a pic? did you use anything to clip it in(such as the plastic that comes around it)

CxG 01-19-2017 06:29 PM
Quote:
Originally Posted by Jake_86 (Post 2287221)
i cant get the h1 to fit at all really. the black plastic part (which is slightly more than a half circle on H1) is too small to get caught by the clips. did you use h1 yourself? can you sneak a pic? did you use anything to clip it in(such as the plastic that comes around it)
uhm I'm using h1's the clips is annoying to get on, both sides had of the clip had to be done at the same time or the little metal washer would slip out of place.

tofux86 03-10-2017 01:17 AM
i just recently got the headlight and hid kit separate. the d2s bulb goes into the AMP > D2S adapters and into the ballast. where am i suppose to connect the other part for the complete circuit.

mclovin85 03-10-2017 01:54 PM
Quote:
Originally Posted by Devante (Post 2265409)
Can I slightly hijack this thread?
If I want these, what all do I need to install them?

I keep reading about D2S, AMP, ballasts, H7 bulbs, etc.
Some I read need the original car to be the HID models. Some come with kits?

I'm about to buy a base model FRS.
I just want these or Winjet headlights, Valenti taillights, fog lights, and an aftermarket front indicator.

I don't want to buy anything I won't be able to use.

Any advice is appreciated!
https://s9.postimg.org/f9ub3tw0r/IMG_3526.jpg

i dont have after market headlights but i do have switchabacks for my car and you will need a led hyperblink module so they dont blink fast... i also have the winjet fogs and install was fairly easy it also comes with a fog switch so you can turn them on and off, i threw in yellow led's from ijdmtoy in the fogs and they give off a more yellow than a 3k hid bulb.. hope this helped you a little bit

CA86GRL 03-10-2017 06:18 PM
Quote:
Originally Posted by FR-S_ATL (Post 2107737)
I'm looking to switch to HID headlights and found spec d lights. I didn't find any reviews on them and was wondering if anyone has these or knows anyone who does.
http://www.protuninglab.com/hidxe12s...id=56128534817

Thanks
I just installed these this week. They are AMAZING


All times are GMT -4. The time now is 03:48 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.