Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   TRD Canards. On a BRZ. (https://www.ft86club.com/forums/showthread.php?t=81283)

boucher 01-24-2015 07:15 PM
TRD Canards. On a BRZ.
 
I wanted to add some canards to my front bumper, but I wasn't digging the options available for the BRZ. I knew the TRD canards were hard rubber, so I figured I could get them to contour to my bumper. I was correct.

https://scontent-a-atl.xx.fbcdn.net/...6a&oe=5563E6BB

GT86drifter 01-24-2015 07:27 PM
it really still looks like a mustache...good job nonetheless

boucher 01-25-2015 11:32 PM
Here's some more.

https://scontent-b-mia.xx.fbcdn.net/...58075356_o.jpg

https://scontent-a-atl.xx.fbcdn.net/...33511377_o.jpg

PandaSPUR 01-26-2015 01:31 AM
http://brooks.net.au/lukespress/wp-c...pes-Of-Mos.png

I'm trying to decide which your BRZ looks closest to, I think either handlebar or french.

Haha, good job though, it looks cleanly done.

boucher 01-26-2015 11:32 AM
Handlebar for sure.

86Tony 01-26-2015 12:16 PM
What wheels are that they look dope

FRSKEV 01-26-2015 12:22 PM
Look to be the new SSRs

boucher 01-26-2015 08:57 PM
Quote:
Originally Posted by 86Tony (Post 2105611)
What wheels are that they look dope
Quote:
Originally Posted by FRSKEV (Post 2105617)
Look to be the new SSRs
Yep. SSR GTV02.

swarb 01-26-2015 09:15 PM
how are they mounted? double sided tape? any heat gun needed? happy with the results/angle? thanks!

boucher 01-27-2015 11:20 AM
Quote:
Originally Posted by swarb (Post 2106347)
how are they mounted? double sided tape? any heat gun needed? happy with the results/angle? thanks!
They install using two bolts that are molded into the canards. It requires drilling two small holes into the bumper. And double sided tape that is already on the back side. No heat gun was needed since the rubber it's made from is pretty pliable. I did have to make my own template though, since they included one is for the FRS. I've very happy with them. Adds a nice touch of aggressiveness to the front.

kev1360 02-08-2015 09:32 PM
I see you have the TRD fender garnish, I have a set also, how do you get the old ones off?
Thanks

cslntuee 02-09-2015 12:35 AM
Quote:
Originally Posted by boucher (Post 2106974)
They install using two bolts that are molded into the canards. It requires drilling two small holes into the bumper. And double sided tape that is already on the back side. No heat gun was needed since the rubber it's made from is pretty pliable. I did have to make my own template though, since they included one is for the FRS. I've very happy with them. Adds a nice touch of aggressiveness to the front.
Could you share how you make the template for BRZ?
Thanks.

boucher 02-09-2015 06:50 PM
Quote:
Originally Posted by cslntuee (Post 2124223)
Could you share how you make the template for BRZ?
Thanks.
Poke the two bolts through paper. Trace around canard. Cut it out. Place on car. Drill. Install. Repeat.

Pretty simple lol.

UrmyboyBLUE 02-10-2015 03:13 PM
Can you take a front view of them?


All times are GMT -4. The time now is 04:41 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.