HVT Camber plates and rear mounts, Project Mu, Cobalt Brake Pads
 

Sold my FRS a while back and still have a few things.

Name: Austin
Location: Atlanta, GA
Contact: Please PM me here

http://i23.photobucket.com/albums/b3...ps559a21a2.jpg

HVT/Turn In Concepts no lift camber plates - Used for prototype AST 4150s for about two months then taken off. May need to have a new top bolt machined depending on your shock of choice. I'm sure HVT or Turn in Concepts can help you with this. SOLD

http://www.hancheyvehicletech.com/pr...10TM-FT86.html

HVT/Turn in Concepts rear top mounts. - used for AST 4150s just as the camber plates. SOLD

http://www.hancheyvehicletech.com/pr...15TM-GT86.html

Also have the following brake pads for sale:

http://i23.photobucket.com/albums/b3...ps98d41147.jpg

Cobalt XR4 rears - brand new - $160 shipped http://www.cobaltfriction.com/produc...124-16.8mm.htm

Project Mu Club Racer rears - brand new - SOLD
http://counterspacegarage.com/pmu-cr-brz-frs-rear.html

Project Mu NS400 rears - brand new - SOLD
http://counterspacegarage.com/pmu-ty...-frs-rear.html

Project Mu NS400 fronts - 1/3 life left - FREE with purchase of Suspension Parts or XR4 or Club Racer pads. SOLD

Make me an offer

Are the HVT Camber Plates a bolt-in for OEM springs/struts? Or would I need a new perch to install them?

@aCab PM'd about the PMU Club Racers. And possibly the NS400's too.

To be honest, I'm not really sure. I'm guessing they would need a new perch as the stock springs have a larger ID than most coilover springs. You could contact Hanchey vehicle technologies to be sure. They can machine you some and provide the necessary hardware to work with the oem struts.

Club Racer and NS400 pads sold. Thanks, Alex

Camber Plates and top mounts sold. Thanks, Joel!

received these today! Thanks for the quick shipping!