Help Fitting Enkei Nt03+M
 

Im about ready to buy some Enkei Nto3 in 18x9.5 +40 and need some input looking to use minimum 245 tires with ST coil overs and looking to lower the car right to the tire so theres just no gap or maybe a little less about quarter inch gap. Ive searched but getting mixed info. Will these fit with 245/255 tires up front with out mods and what mods would i need to get camber to be around 2 deg. thanks in advance.

They will fit - you will not need to go to -2 degrees either. But if you want that, either buy market top hats/ camber plates or just some crash bolts up front, those plus the 1.5" or so drop will help.

However, if you drop more than an inch you typically need to do things to the rear suspension set up for it to work (ie control arms etc)