Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - 3rd Brake Delete

- Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)

- - 3rd Brake Delete - Suggested Solution for the holes. (https://www.ft86club.com/forums/showthread.php?t=79453)

3rd Brake Delete - Suggested Solution for the holes.

I know alot of you guys that did a 3rd brake light delete to move the brake light. But when you do this, you're left with this.

http://i.imgur.com/oE9QjuG.jpg

Ugly as hell. And i know some of you guys used felt and stuff or actually re covered the entire board. My suggested solution is a 3D printed plastic piece that fits right into those open holes. The plastic will mimic the Side Plastic pieces to give it that OEM look. Would look like this after some photoshop.

http://i.imgur.com/Sn4HX4O.jpg

And here's some ugly photoshop from the bottom up view!

http://i.imgur.com/BxBPeac.jpg

Anyone with a 3D printer willing to make this?!

Really interested in this. How hard was removal of the light? What about legal issues?

Quote:

Originally Posted by jdmblood (Post 2061731)

Really interested in this. How hard was removal of the light? What about legal issues?

Did this.
http://www.ft86club.com/forums/showthread.php?t=72225

Quote:

Originally Posted by IgnitionGundam (Post 2061725)

Printed parts are extremely unnecessary for something like this. Just cut out pieces of felt. and blend it. If you want the plastic look, cut out some 1/16 - 1/8 hobby grade wood and paint it. You can do it in a night.