Skunk2 Header?
 

Anyone have one?

Anyone have dynos?

Anyone have sound clips?

A user ( @fz6r ) review of it on the @fteightysix blog here:
blog.fteightysix.com/skunk2-alpha-header-review/

Was just about the post that very same link.
Good 3rd party information.

Nice sound clips too!

Guys here is a Direct link to the review -

Also - We have Spoke to Skunk2/Kraftwerks All the new headers are Cleaned up on the inside -

http://blog.fteightysix.com/skunk2-alpha-header-review/

http://blog.fteightysix.com/wp-conte...60346146_n.jpg

Are there any dynos after a tune?

I know this is a bit off topic. You aren't affiliates with 86_zn6 by any chance?

Skunk2 Header?
 

This...

anyone dyno'd yet?


Sent from my iPhone using Tapatalk

No we are not:iono:

Not that we know of at this time. They just dropped last week, we have 3-4 sets installed here. 3 that i know of, 1 that has been picked up, we have one installed on the shops 10 series. We have not put the shop car on a dyno, maybe i can talk Malen into getting the car stock, getting a base line off Church's DynaPacks then with the Skunk2 intake, then with the header.. And we would at least have a baseline from there on out to compare parts, of course the heat would play a big role here as its a great 65 or so now and when it hit 110-115's it would make a difference.. I can say after week with the header on no CEL yet, No exhaust leaks, The car is performing great with the Skunk2 intake, header, and MXP Catback

-Thomas

Sounds like a plan. Would be great to have those three dynos to compare. Any chance on high flow catted version?


Sent from my iPhone using Tapatalk

Thomas, how would you compare this Skunk2 to the MXP?

Oh man.. thats a hard question..

For the price point the Skunk2 is a great header, the first 20 that went out, needed a little bit of finishing work, but they are correcting that now and its fixed from here on out. BUT again the price point is good and for a EL it sounds great.

My MXP UEL.. i love it, id pick it over any other UEL, EXCEPT the JDL, i mean you get a over pipe with it, looks amazing and sounds amazing.

The MXP EL vs the Skunk2.............. that would be hard, they are both great headers, i wouldnt be upset with either on my car. IF you was going for the over pipe in the future then its a no brainer to grab the MXP, if getting a over pipe isn't in the plans, then getting the Skunk2 is the best option.


-Thomas

That's exactly what I was looking for. Will probably roll with the MXP and will get it from you. Can't resist the value of the overpipe and of course that UEL rumble.

Thanks man!

I'm gonna Skunk it up and see how it goes....stay tuned!