|
smaller washer reservoir for use w/ brake ducts
5 Attachment(s)
Hi everyone I'm new to this forum and I don't have a FRS but maybe one day. I've been looking around and noticed some people were having problems routing their brake duckts, especially on the driver side due to the washer reservoir size. So I thought I would make a smaller one out of aluminum and tig weld it together. I just have to swap the motor and filler neck, but the neck will have to cut about 2 inches. Sorry about the pic quality. Let me know what you guys think please.
:burnrubber: |
I wanted a smaller reservoir and the only place that makes them is TMG iirc. I don't think you can buy it without buying the racecar
|
| All times are GMT -4. The time now is 11:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.