Invidia N1 Replacement Gaskets
 

Hey guys, bought a used Invidia N1 exhaust and need new gaskets, been trying to find the part number for it and can't seem to find any. Anyone have ideas?

I believe they are standard 2.5 inch gaskets.

http://www.grimmspeed.com/grimmspeed...25-2-5-gasket/

Get the Grimmspeed multi-layered gaskets from rallysportdirect. I have the same exhaust and I'm thinking of replacing all gaskets

Did you buy these for your exhaust @Midarete ? Curious, i want to do the same, i think mine are done

I actually bought these http://www.frsport.com/GReddy-110003...T_p_26307.html it was a perfect fit and no exhaust leaks.

I went to autozone/O'Reily and asked to see their box of exhaust gaskets... I eventually found some that were very similar for less than $2 bucks total. Don't waste your money buying them online.

I'm picking up a used N1 catback tomorrow from a guy close to me. he said the gaskets were not going to be reusable so how many total am I going to need? Do I need 3?

Yes, you need 3.

awesome. thanks for quick reply. just didn't want to start ripping it all apart and be 1 short! does anyone have any opinions of the borla uel paired up with this catback? I've done some searching and listened to videos but every video sounds different because of recording quality. I'm hoping for a nice deep tone (the rest of exhaust is stock besides headers).

would you be able to tell me what size bolts and how many i would need?

Probably a better question for Invidia support. I don't remember the bolt size, but I know you can get them at a hardware store. Could test fit a few. I want to say a 14MM socket worked on it.

Does anyone have the size for the gaskets im at autozone now trying to figure this out.

Sent from my SM-N910P using Tapatalk

yeah i thought i was the only one, my gaskets are done

I found a few similiar but not exact fit as the ones that were on it but looks like it will work

Sent from my SM-N910P using Tapatalk