OFT manager v1.31 ADV Multiplier at 0
 

Hi.
i have the v1.31 manager with SW/HW version 1.00

i just flashed to stage1 91 and let the car idle for 10min
the adv multiplier is at 0.

is this normal?

Thanks

help please, i just want to get this fixed before i flash stage2 with my catted headers and full exhaust so i can watch for knocks

Make sure you also installed the correct template file onto your OFT. Check the download list on the website, should be a template file that you have to manually install.

oh wow,
i forgot to rerun this when updated,
Thanks.



hmm my adv multiplier is at .69 - 7 while cruising.
i guess it needs times to adjust?

try different gas of brand first and see it.

also you need to run stage 1 with catted header. stage 2 is for catless header

yea i will. im at half tank on SoCal chevron 91.
everytime i put foot down my adv multiplier goes down. im at 5.4 now.
seems like im not getting an optimal tune.
but then again im only about 50 miles into my stage1 tune.

gana try 76 or shell next

try 93 gas as well

i wish but socal only has 91