FS: ENKEI RPF1 SBC 17X9 +35 5X100
 

Spec is 17x9 with a +35 offset and 5x100 bolt pattern. The finish is called Special Brilliant Coating or SBC for short. It gives off a dark chrome look and really reflects light well. These are special order only from Enkei direct, as far as I know the only way to get these is via a groupbuy. They were purchased through Counterspace garage. Perfect fitment for FRS's and BRZ's as well as I think WRX's. I will include hub rings at no charge, no centercaps are included.

Wheels are 9/10 condition, a few small stone chips on one from an off course and a few minor streaks from cones which should be easy to buff out.

Comes with original boxes and packaging. Will ship at buyers expense.

Asking $1,200, no trades

http://i.imgur.com/5NmHIzi.jpg

http://i.imgur.com/v7nB8jD.jpg

http://i.imgur.com/GfNIBdR.jpg



http://i.imgur.com/8liYnGX.jpg

http://i.imgur.com/yzVrgVJ.jpg

http://i.imgur.com/22lwUFi.jpg

http://i.imgur.com/VF6BDi1.jpg

http://i.imgur.com/O2TipBC.jpg

http://i.imgur.com/AaKlQAK.jpg

http://i.imgur.com/XSIMZhA.jpg

http://i.imgur.com/SJ7urtF.jpg

http://i.imgur.com/3s82F1e.jpg

Updated with mounted pictures

Such awesome wheels wish I had them in 17s

What size tires did you go with these wheels? Looked real good

245/40/17 BFG Rivals

Bump, these wheels will provide erections in real life

Where are you located?

I've got a semi just seeing the pics but sadly my wedding is taking all my wheel funds.

Pretty sure these would be sex on anything but esp. on my SWP.

Winnipeg, Manitoba, Canada, PM me a zipcode and I can get you a rough shipping quote.

Hi, can you post any pictures from the front or back mounted? did they sit flush with the fender or was there any "poke"? pretty much any comment on fitment would be helpful :) thanks!

There is an 21 page thread on fitment of this wheel.

http://www.ft86club.com/forums/showthread.php?t=15160

Vehicle and tires are both gone and I don't have photos of the fitment specifically.

Rear was flush with the rivals and fronts had maybe 1/4 inch of poke but this was mostly due to the tread design of the rivals. Running a tire with a square sidewall should match up great as would adding a touch more camber. Also take a look into the fitment thread mentioned above.

Please make adjustment to your listing or this will be deleted. Fair warning.

Member Classified Rules: http://www.ft86club.com/forums/showthread.php?t=61832

I'll post up a sign tomorrow

Interested...
 

Check your DM's when you get a chance. Might be able to purchase these. . .