Need help wiring my Kenwood DNX571HD.
 

Materials I am using

Beatsonic double din installation kit
http://www.carid.com/2013-scion-fr-s...-17226975.html

Here is my problem.

I don't know which from the two wires left unhooked (POWER control wire or Antenna control wire) from my kenwood 16pin connector is to be connected at pin 9 and 8 of the D14 connector(10pins, beatsonic side, blue wires that are jumpered together).

PS. i also know that on the D14 connector(10pins). Pin 9 goes to the factory amp for the speaker doors and pin 8 goes to antenna amp, i think.

So, Should i connect PIN 9 and 8 from D14 connector altogether to the Power control wire or the Antenna control wire of my kenwood 16 pin connector?

sorry for my bad english.

here are some photos for better illustrations
1. Wires I have already installed. below
https://fbcdn-sphotos-e-a.akamaihd.n...10913632_o.jpg


2. What is left
https://scontent-b-sjc.xx.fbcdn.net/...07606306_o.jpg

D14 pins 9 and 8 jumpered together (this confused me)
https://fbcdn-sphotos-b-a.akamaihd.n...79761386_o.jpg

I did ignore the steering wheel remote input wire and mute wire from the 16 pin kenwood connector.