Wire Tucked Bays
 

I always fall in love with a properly tucked engine bay. For me, less is more. Over time, I plan to tuck and delete as much as I can from my bay. I'm posting some that I've found, but go ahead and post any tucking or deleting you've done.

The FRS/BRZ bays I've found:
http://www.scionlife.com/wp-content/...Engine-Bay.jpg

http://frsbrzperformance.com/wp-cont...tle-bodies.jpg

Other Subaru bays:
http://riskyprojectz.com/wp-content/...3-1024x678.jpg

http://riskyprojectz.com/wp-content/...8-1024x678.jpg

http://riskyprojectz.com/wp-content/...5-1024x678.jpg

And mine. So far, all I've done is hide the windshield washer tube on the driver's side. Next I'll move the hood latch cable.
https://scontent-b-lga.xx.fbcdn.net/...ef&oe=54B7B075

Wow, those look great. Any tutorials for a beginner like me?

Just do a lot of reading. Those other cars have many hours of work to get them that clean.

Shit is dope. Never considered it. Just set my AR to a whole new level.

@Jesse@JDLAutodesign and his gorgeous bay

https://scontent-b-dfw.xx.fbcdn.net/...d9&oe=5492F4D6

I believe the green speedhunters bay that you posted does not have working ac etc etc. and the purple one with itbs wasn't a properly working car. Im not exactly sure but I believe I read that somewhere on the forums or some stance page. I think moving the battery to the trunk and removing the intake resonator tubing really cleans it up by far.

I want to say I remember reading the same thing about the ITB car. The green car is @chasebays.

The itb's are on the Weld FRS so its that car's bay.

Thanks! Still have to finish the Mil-spec harness and have some custom ac lines done...wish i had more time to work on my own car.

There will be a few more cars with nice bays at SEMA, i know 2 of the Scion tuner challenge cars for sure.