Installing Red Stitched Handbreak Lever and Boot
 

Has anyone purchased and installed the following parts to complete the interior red stitching look of the FR-S?

http://subaruonlineparts.com/subaru-...ot-p-1349.html

http://subaruonlineparts.com/subaru-...er-p-1350.html

I know that JPM Coachworks has a similar boot but trying to decide from where to buy the parts.

http://www.jpmcoachworks.com/jpm/sho...rake-boot.html

I have the JPM e-brake boot and it was a simple install. You will need some sort of adhesive to attach the replacement boot to the existing panel (you peel the old one off). I didn't replace the ebrake handle, but it is probably just a few screws that hold it in place.

Did you use 3M tape?

Redline goods also sells the covers, but quality depends on the installer.
Here's my DIY - perforated nappa leather w/ red stitching for the hand brake cover, and OEM glove box cover.
The OEM BRZ handbrake cover and arm rest cover is made of vinyl - since I did a leather conversion in my car, I wanted to get genuine leather pieces.

https://farm4.staticflickr.com/3813/...b22c819f_z.jpg
https://farm6.staticflickr.com/5560/...62a17767_c.jpg

A friend ordered some of the JPM stuff before me and he bought the spray adhesive that JPM offers so I used that.

As the above poster mentioned, Redline Goods does offer the same parts, but from the pictures I am not a fan of their quality when compared with JPM.