Review: Winjet fog lights
 

Got a pretty decent deal on winjet fogs,
Picked up from @JonMotoring
feel free to PM him for prices, hes located in Socal/SGV
it comes with:
-Screw/mounting hardware
-2 fog housings
-2 h11 bulbs
-2 plastic glossy bezels
-wiring harness with switch
-cable zip ties

[IMG]http://i1304.photobucket.com/albums/...psjol5nedd.jpg[/IMG]

[IMG]http://i1304.photobucket.com/albums/...ps6giolgmt.jpg[/IMG]

http://i1304.photobucket.com/albums/...psdceqxp5s.jpg

http://i1304.photobucket.com/albums/...psiofun0pe.jpg

[IMG]http://i1304.photobucket.com/albums/...psmkmqtphp.jpg[/IMG]


[IMG]http://i1304.photobucket.com/albums/...psstjivpze.jpg[/IMG]

It is what you would kind of expect from a made in china fog like kit, i do plan on selling the wire harness and switch, as i have no use for the switch anyways.

https://lh5.googleusercontent.com/-z...520-%25202.jpg

as i will be making my own harness and will be controlling them with the BRZ stalk



here is what i found concerning.

On the last picture, the fog on the right looks like its not sealed all around, while the fog on the right looks like they went overboard on sealing the glass on the housing. now i am very eager to installing them but i don't want condensation build up inside the bulbs as it is starting to cool down here in socal.

Should i contact winjet about their quality control? they are like 10 minutes away from where i live.

Edit: i found that the screws that was included were rubbish , a trip to home depot for some screws washers, and nuts would fix that.

Contact the vendor your purchased it from or winjet to see if they can get you a replacement. Never hurts to try.

I sent winjet a e-mail with photos attached hopefully they respond, in the mean time i got adventurous and ran the housing under some running water to simulate car wash / rain hope they don't read this :laughabove::laughabove:

my housing are in a fridge to simulate a a cool socal morning :bellyroll:

I just installed mine a couple weeks or so haven't washed my car with them on yet. Keep this post updated and let us know what winjet says!

I purchased the yellow tinted Winjet foglights from FT-86 Speedfactory awhile back. They have been through heavy rain, car washes and so far 50 degree weather. The lenses cracked the first week owning them though, and they have been working just fine. I do commute on the expressway very often which explains why they cracked. I didn't think though it would have been that easily.

Within the first week?? I wonder how long mine would last then

E-mailed winjet, no response
contacted vendor, awaiting further action,
so i can see why some people would have cracked winjet fogs, their glass is so soft, i literally chipped off a piece of glass with my finger nail.

i would not recommend winjet fogs, i rather spend a little more money and get better than Chinese knock offs

Update: i was able to get my money back thanks to @JonMotoring still no e-mail from winjet, :mad0260:what a joke
i used the money towards a front lip :happyanim:

what kind of front lip :-)

I also bought the same fog thanks for the pm link.
Ive not opened mine up yet

Forcewerks v2