Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   EcuTek preparing to release PRO ECU software for BRZ (https://www.ft86club.com/forums/showthread.php?t=7480)

xjohnx 07-06-2012 02:17 PM

Quote:

Originally Posted by xcelir8brz (Post 299596)
subscribed

http://i.imgur.com/YoRgY.jpg

FastechMotorsports 07-06-2012 03:09 PM

Where you guys able to tune transition points between direct injection and port injection? And did you have control over every parameter in the ecu, or is it still being developed?

-Mark

Visconti 07-06-2012 03:11 PM

Quote:

Originally Posted by FastechMotorsports (Post 299814)
Where you guys able to tune transition points between direct injection and port injection? And did you have control over every parameter in the ecu, or is it still being developed?

-Mark

That stuff is still being tested.

We have access to everything we need to tune, that's including data logging ..

Everyday they add more stuff.

John

RWD-boxer 07-09-2012 11:18 PM

Yeah tuner who can't get rpm...... I will wait for Cobb!!

We need proof in numbers and videos.... One video no cuts for you to change the weight of the car to get your hp gains

Visconti 07-09-2012 11:22 PM

Quote:

Originally Posted by RWD-boxer (Post 305385)
Yeah tuner who can't get rpm...... I will wait for Cobb!!

We need proof in numbers and videos.... One video no cuts for you to change the weight of the car to get your hp gains

Take a look - 2 other graphs with gains.

Tomorrow another one goes on the Dyno with my Flash.

Next week I'll be doing baselines and header testings with at two different shops...

So hang tight for more results.

John

jedibow 07-09-2012 11:26 PM

tac signal
 
Quote:

Originally Posted by Visconti (Post 297968)
We had a problem picking up the tac signal ... so no rpm or trq.. But you get the picture.

This car I tuned is a shop car and they are testing out parts for a few different guys.

So normally your right - wouldn't make sense.

So car had no boltons during baseline and STG1 flash.. Now has a header, waiting to hit the dyno again

John

Hey John, clamp all the wires behind the drivers side valve cover, that was the only way for me to get tach when I dyno'd my car.

And for the smart person above, tell us were to get a tach signal that will not jump off during the pull?

Sorry John, that crap is starting to iritate me.

Visconti 07-09-2012 11:27 PM

Quote:

Originally Posted by jedibow (Post 305406)
Hey John, clamp all the wires behind the drivers side valve cover, that was the only way for me to get tach when I dyno'd my car.

And for the smart person above, tell us were to get a tach signal that would jump off during the pull?

Sorry John, that crap is starting to iritate me.

Thanks - I believe someone else also told me the same thing - after the fact.

Now that I know where and how it won't be a problem next time at the dyno.

;)

-John

RWD-boxer 07-09-2012 11:32 PM

My obd2 can get rpm all day

Visconti 07-09-2012 11:44 PM

Quote:

Originally Posted by RWD-boxer (Post 305426)
My obd2 can get rpm all day

Your posts are so useful...:laughabove:

RWD-boxer 07-09-2012 11:50 PM

Just trying to protect owners. From buy a product with no proof . Anyone can fake a dyno gain! All videos you have cut away haha

Visconti 07-09-2012 11:53 PM

Quote:

Originally Posted by RWD-boxer (Post 305477)
Just trying to protect owners. From buy a product with no proof . Anyone can fake a dyno gain! All videos you have cut away haha


yuuup fake gains lol :bellyroll:

kanundrum 07-10-2012 12:04 AM

In Norwalk, saw a Red BRZ at a dealership off of Main Avenue =D

jedibow 07-10-2012 12:04 AM

I think it is almost time to put him on ignore...

RWD-Boxer, I understand that YOU know how to fake a dyno, I also understand that you assume that John faked his dyno, however have you actually researched what you are accusing John of????

If you are saying that John faked his dyno, then that MUST mean that Perrin also faked their dyno, and OBVIOUSLY LaChute tuning also faked their dyno...

Come on, just because you think you know what you are talking about does not mean that you ACTUALLY do. This is a great forum full of intelligent people that are willing to help others, and others that offer golden eggs at no charge. Why must you come into this thread and start drama? If you want to wait for Cobb tuning, do it, I don't really care, much like if you want to pick either your noise or your A$$, do it makes no difference.

Here's a thought for you, click on new topic (I'll even tell you where it is... upper left corner) in the forum listing and discuss how amazingly awesome Cobb tuning is IN YOUR OWN THREAD....

Rant over......

G

SUGOI, HONTONI SUGOI

mattles 07-10-2012 02:31 AM

I gotta tell you guys, my quality of life on these forums improved tenfold when I decided to add @RWD-boxer to my ignore list several days ago. I urge you to try the same, I can guarantee positive gains :D


All times are GMT -4. The time now is 03:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.