![]() |
**$700** FRS 6MT 17k miles + MOST things you will need for an AT->MT swap
$700 for transmission picked up + all listed items for free
Or $700 + shipping and fees, if you want everything else in the thread shipped keep in mind it WILL be significantly more expensive as weight and pallet size will increase not to mention more work for the guys palletizing it all. Been having a lot of A/T guys having interest in my transmission. So here's more info on what else I have for any of you guys wanting to go MT. For 1100 shipped I can include the following with the transmission: - starter - clutch w/pressure plate and hardware - flywheel w/hardware - slave cylinder - clutch fork - throw out bearing - driveshaft - shifter lever *all items have roughly 17k miles on them and are located in Fairview Heights, IL (62208, aprox 15 minutes East of St. Louis, MO). All items are not displayed in these pictures. I do not know what all would be involved with doing a complete manual transmission swap into an A/T brz/frs... But I would assume a possible ecu swap or some other electrical work around would be involved. http://i30.photobucket.com/albums/c3...psebzqthil.jpg http://i30.photobucket.com/albums/c3...ps0892ff52.jpg http://i30.photobucket.com/albums/c3...ps884a985e.jpg |
Bump let's get this thing sold
|
Bump
|
Tons of interest, many extreme lowballs.
|
Still available
|
How many miles on this? what was the HP you were running with this (engine mods)?
|
17k miles total. Less than 2800 miles with a kraftwerks c30 rotrex kit. My 93 octane map made 290 on a dynojet.(mind this is pretty much peak at redline)
Only selling due to my swap. |
----
|
Post updated.
|
Bump
|
Bump
|
Hi
|
Bump, trans alone $1000 shipped
|
Bump
|
| All times are GMT -4. The time now is 07:28 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.