Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   Any idea to mount tablet on seat rail?? (https://www.ft86club.com/forums/showthread.php?t=73188)

Mikeez 08-29-2014 09:00 PM

Any idea to mount tablet on seat rail??
 
1 Attachment(s)
Hello, I have this tablet seat mount that gets hooked with the bolt on the seat rail.... If that made sense..


Anyways, how do I loosen the bolt on the seat rail? I know I need a LONG torque wrench and a special E-Torx wrench or something (E-10?)? How tight is it lol?


Or do you have any idea for this??? Check pic attached

nzer 08-29-2014 10:20 PM

It's pretty tight. Make sure you have the right fit socket for it and be careful.

Once removed you can replace with a "normal" head bolt to make it easier in the future. That's what I have done for my fire extinguisher mount using those bolts.

Grateful Dave 08-29-2014 10:22 PM

just drive the car, don't worry about Fn tablets

Mikeez 08-30-2014 12:03 PM

Thank you for the help, but what kind of wrench you used?

For the second person, I want to mount the tablet.

nzer 08-30-2014 04:29 PM

Nearly missed this question @Mikeez - remember to tag as there's so many posts on this forum.

I used my large torque wrench with an adapter to fit the small socket.

aagun 08-30-2014 07:48 PM

mine loosen up and i use TIG welding with other nut to remove it .

Fastbrew 08-30-2014 07:58 PM

Yo - just out of curiosity - do you have a link to a pic of how this thing will be positioned after you get it done? I have a cafi android unit mounted in my dash but I am curious how this will look.

Thanks and gl!

Mikeez 08-31-2014 01:38 PM

Quote:

Originally Posted by nzer (Post 1924755)
Nearly missed this question @Mikeez - remember to tag as there's so many posts on this forum.

I used my large torque wrench with an adapter to fit the small socket.

Oh alright and sorry about this.

Quote:

Originally Posted by aagun (Post 1924883)
mine loosen up and i use TIG welding with other nut to remove it .

Thank you I will try to do that xD

Quote:

Originally Posted by Fastbrew (Post 1924890)
Yo - just out of curiosity - do you have a link to a pic of how this thing will be positioned after you get it done? I have a cafi android unit mounted in my dash but I am curious how this will look.

Thanks and gl!

If you want, once it's done I'll make a journal and tag you?

westendRIOT 09-03-2014 01:20 AM

I've been there with this mount. The pesky security bit came out (carefully) with a standard hex. Then I realized the forked tongue is too fat to fit in the dimple of the seat rail.

I didn't feel like adding washer spacers to get up out of the hole, along with a longer bolt to compensate for the lost threads so...

Second choice: Passenger footwell side of the front center console. Pop off the plastic trim piece to reveal a few eligible bolts. I think they were all standard hex.

Be careful bending the pipe of the mounting arm. It's strong but can fatigue and break if you abuse it.

GL!

hypercarfanatic 09-03-2014 01:40 AM

Subbing because I want to do the exact same

Is it bad that I don't have the car, yet am planning out the thousands in mods that I want? Nahhhh

Mikeez 09-08-2014 01:28 PM

Quote:

Originally Posted by westendRIOT (Post 1928727)
I've been there with this mount. The pesky security bit came out (carefully) with a standard hex. Then I realized the forked tongue is too fat to fit in the dimple of the seat rail.

I didn't feel like adding washer spacers to get up out of the hole, along with a longer bolt to compensate for the lost threads so...

Second choice: Passenger footwell side of the front center console. Pop off the plastic trim piece to reveal a few eligible bolts. I think they were all standard hex.

Be careful bending the pipe of the mounting arm. It's strong but can fatigue and break if you abuse it.

GL!


I'm not very familiar with the words haha, whats the front ceter console? Isn't it the one next to the passenger seat?


All times are GMT -4. The time now is 01:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.