19" Fitment Help S1R RBv1
 

Hey all, going to be purchasing a larger set of wheels to fit this week and was hoping some other rocket bunny owners might be able to help select the proper offset. I've decided to go with Work S1R so their will be plenty of wiggle room with the offset.
I've been recommended running 18x9.5f 18x10.5r
But I was hoping to go larger with 19x9.5f 19x11r

This is the PDF for the wheels . I would be running the 0-Disk
http://www.workwheelsusa.com/media/w...S1R%20Spec.pdf

I'm going to order monosport coilovers and a set of rear lca at the same time; whiteline if they're available, if not cusco. That should give me camber adjustment.

You fitment tips are greatly appreciated! :thanks: