Underpanel part number
 

While I installed my header this past weekend I removed both the metal and fiberglass underpanels. I left them removed while I wait for an O2 sensor bung and extension cable to arrive in the next day or two. I didnt realize that the panel to the rear of the fiberglass panel was not secure enough (secured with the same bolts) while at highway speeds. So this panel has been smacking the ground and the holes in the plastic used to secure it are ruined. I now need to replace this panel but can't locate the part number.

I found PN's for 1, 2, and 3 on a site, but cant find the PN for #4. Anyone?
http://www.tune86.com/sites/default/...underpanel.jpg

If I were you, I'd buy the aero underpanel kit since you're already replacing half of them. ;)

Not really looking to upgrade and it's only replacing the one little piece, nothing else.

The part number isn't on the panel itself?

I didn't check but I will, thanks

I did the exact same thing! I just used a little fiberglass resin and some flock and made some new screw holes.

Did you ever find the part number..... I did the same thing as you.

No but I'll probably jack the car up this weekend to find out and I'll post here.

42045CA010

That's it, ty @Laika

It's probably cheap to buy new but since many people replace them with the full sized ones, you might be able to buy it 2nd hand even cheaper or free

Yup, I found it new for ~ $26

Hook us up with those PN#'s while you've got them. I need to replace part #1.

I'm looking for the part number for panel #3, but I'm having trouble finding it. If you can share the part numbers that would be awesome!