P3 Car Vent Gauge Introductory Special! $375 INSTALLED!
 

As you guys know at AZP we don't simply push out whatever the manufacturers are throwing out there. We also don't sell products that we haven't personally used and abused on and off the street.

With that said, we recently have installed and tested the P3 Cars Vent Gauge in our project BRZ for use in logging our oil and coolant temps on track. We've been testing the Koyo Aluminum Radiator and have found the track temps to drop from 215 to 195-200 on the coolant! Currently we are running the OEM oil cooler or lack of an oil cooler and are seeing temps in the 265-275 range on track w/Motul V300 5w30.

The P3 Cars Vent gauge has been a great help and it looks like an OEM part and doesn't block the entire vent. We reached out to P3 Cars since we liked the quality of it and decided to stock these for our BRZ/FRS customers. We are offering an amazing deal for the introductory sets of these at $375 INSTALLED which is less than the $389 price for the gauge alone!

The gauge uses the OBDII port and the OEM sensors to display on screen and even dims with the headlights too. Additionally there are (2) Analog inputs where you can hookup sensors which we plan to do on our project car for things like Oil Pressure etc. Details on the gauges can be found at P3 Cars Shoot us an e-mail Sales@AZPInstalls.com to setup your appoint as this is a limited time offer.

https://fbcdn-sphotos-a-a.akamaihd.n...83044636_o.jpg

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

This is awesome! I think I'll get one of these when I get my FR-S.
The OEM look and functionality of the vent are great!

If anyone wants to check it out we have it on the project car at the shop and we can show it to you live!

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

You guys know how to run oil pressures readings out off the gauge ?

We haven't done this yet but it is something we plan to do on our own track project BRZ. Shoot us an e-mail and we can work with you on this if you'd like.

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

you will need to buy and install an oil pressure sensor and wire it to one of the aux inputs on the gauge. I have it set up and it works great.

Yeah def let me know when you can tackle this, I'm sure running the line shouldn't be an issue it's just not sure on how to program the unit.

Will do. We never use our customers as test beds unless they really want us to. So once we get it all setup in our car we will definitely be offering this services.

Do you run an oil cooler currently?

Mike

Currently No, i was supposed to be working with Mishimoto on a FMIC application but they have been busy with the new STI products so that was placed on the back burner. I know FB has a oil cooler kit and i was contemplating just going with them.

So far the best units we've seen have been the Jackson Racing units the west coast guys as CSG have been using them. We plan to test out the OEM WRX 2015 setup and then the Perrin, after that we will go either JR or our own custom setup.

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

Only a few more weeks left on this deal then it goes back to $415 installed!

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

Got mine put in on Wednesday! Working well! Thanks Mike!

Thanks, use it in good engine health!

The guys LOVE your header and Catback. They want to put that setup on our Project BRZ too.

-Mike Paisan

http://www.pbase.com/paisan/image/153798190.jpg
Maintaining, Modifying and Educating TriState Enthusiasts since 2001.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

Can I buy this and have it installed at later date.Kinda like reservation since I'm from Long Island and don't travel to NJ that often.