Front Bumper Mustache Holes
 

In my last car I got pulled over twice for no front plate. So I got the Grimmspeed plate relocator one and put a 1 inch hole in the tow hook cover. I removed the stock center plate holder and now I have two holes where the last owner screwed right in to the bumper. Anyone have any ideas on what I can do about the two holes in the mustache now. The holes kind of pull away from the body and other me a lot. I know the part is attached to the molding so I cant just remove it and add a grille.

bondo or some other filler and some black paint. and maybe some therapy for the ocd.

Could always vinyl wrap the mustache.

Has anyone wrapped this portion? that is an excellent idea! I got two holes, and id like to match my front CF lip.

You can use small plugs.

vinyl, or plasti dip. I plasti dipped my rear oem diffuser portion of the bumper after putting the car backwards through the woods at a high rate of speed. Plasti dips thickness and self leveling properties worked at filling in all the cuts I had.


Sanding it smooth and using vinyl is probably your best bet though.

There is a lot of texture to sand AND get smooth for vinyl. I think Ill get some pics tomorrow. Im thinking I can back fill the holes with some sorta black putty and cut off the section of plastic that is pushed out.

black rtv. I used some to turn my stock antenna into...well.....i just unscrewed the stub and put black rtv over it and no one ever notices.