Engine parts pictures
 

Hello Everyone,

Thought I'd share some pictures of the new engine parts.

First off we have the engine hanger SST.
The engine only has one hook, so if you plan to pull the engine up you need this part.
http://www.141motors.com/86/engine_hook.jpg


Next the pistons:
They are different left and right hand.
Also available in 2 standard sizes which are labeled size A and size B
http://www.141motors.com/86/pistontop.jpg

http://www.141motors.com/86/pistonbottom.jpg


Last picture I have to share is of the connecting rod:

http://www.141motors.com/86/fa202.jpg

http://www.141motors.com/86/fa203.jpg


Hope everyone enjoys the pictures.

Ishii

The pistons look to have very thin crowns especially below the bowl. Not very good for FI.

The rods look reasonable though.

Pistons and rods: forged or cast? (They look cast but I don't honestly know)

Pistons look cast, rods look forged.

Rods look cast too. You can see the seam from the casting mold.

that looks more like a forging mark than a casting line. IME, casting lines are much thinner.

awaiting specs and dyno :) :party0030:

Does anyone know what kind of engine mounts it uses? Hydraulic or rubber or what? Thanks.

http://blog.perrinperformance.com/wp...nt-550x366.jpg

The good/bad old STI plastic/rubber mounts.

Drool material!

Thanks for the excellent pictures! What is the rod length measurement?

I'm sorry I don't have it here anymore. It's getting measured out for production of forged high strength replacement. :burnrubber:

Ishii

Thank you for the reply! Please let us know if you can once it is measured for forged replacement.
:thanks:

What's the length, if I may ask? :)