Can anyone be so kind to get me measurements?
 

Hi FRS/BRZ crew!

I come from the Toyota side (toyotanation.com specifically). I have a 5th gen Camry XLE V6 and I was wondering if anyone could help me out with the picture below? I'm looking for measurements of your rear diffuser triangle plus the white reflectors on both sides (inches/centimeters/millimeters all welcome):

http://i.imgur.com/fAJpOqz.png

A) ?
B) ?
C) ?
D) ?
E) ?

Your help would be greatly appreciated!

If I remember after work I'll get them for you

Do you need the depth of the red triangle, top to bottom?

Never mind. Just had my coffee. :-)

Awesome!

No actually that is a very valid point! To make sure everything even I would like to get the height of the red triangle as well, edited in the green below, measurement F please:

http://i.imgur.com/uSntmyN.png

Curious as to why you want the measurements! Also The white are not reflectors, they are the reverse lights (if that makes a difference to you)

sent via mobile.

I want to mock up something similar for my camry. Thanks for the correction!

Figured I'd try and help since I'm not doing anything and my car is parked right outside my office:


A. 7"
B. 4.5"
C. 6"
D. 3.5"
E. 1.5 or 1-9/16th (This one was a little iffy. Its not an exact science as all the edges are sorta rounded, but this one may be closer to 1-9/16ths of an inch.)
F. 2-5/8th (This is another weird one. I was tempted to round down to 2.5" but maybe you need it more exact.)



All measurements are taken while sitting on the hot asphalt in my slacks, so YMMV lol. I do think all of them are pretty close though.


Best of luck on your project!

Wonderful! Thank you. I will mock up a drawing.

Please post up pics when you're done!

Sent from my SM-N900T using Tapatalk

so what are you planning to do? put one of these on your camry or fabbing something else?