Stock Dyno vs GReddy Intake Dyno
 

Did this dyno just before winter, thought I'd post it up here.

Info:
Location: Calgary, Alberta (Canada)
2013 FRS - 6spd - 3,000km on car
Ambient Temperture: 10deg Celsius
No other mods, no tuning.
Stock rims/tires
Dyno Dynamics Dyno (Operated @3500ft elevation by Vex Performance)

Intake was installed ON the dyno after baseline pull.

Results:

Stock: 148.4whp
GReddy Momentum Intake: 151.5whp
AFR: 1 point more lean across whole RPM range. (Woop)

https://fbcdn-sphotos-f-a.akamaihd.n...86945151_n.jpg


https://fbcdn-sphotos-d-a.akamaihd.n...73898263_n.jpg

https://scontent-a-ord.xx.fbcdn.net/...44096410_n.jpg

https://scontent-b-ord.xx.fbcdn.net/...76318622_n.jpg

https://scontent-b-ord.xx.fbcdn.net/...25673493_n.jpg