Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Suspension | Chassis | Brakes -- Sponsored by 949 Racing (https://www.ft86club.com/forums/forumdisplay.php?f=59)
-   -   Conflicting torque spec (83 vs 106 ft-lbs) for Whiteline KCA416 (https://www.ft86club.com/forums/showthread.php?t=66886)

jonnyozero3 05-29-2014 01:39 PM
Conflicting torque spec (83 vs 106 ft-lbs) for Whiteline KCA416
 
Anyone know what the correct torque spec is for the Whiteline KCA416 camber bolts in a BRZ?

The installation instructions say 83 ft-lbs/113 Nm, but there is a sticker on each individual bolt bag that says torque to 106 lb-ft/144 Nm with a dire warning not to over-torque.

Anyone know which is correct?

Edit - it's 106-110 flt lbs.

jonnyozero3 05-29-2014 01:46 PM
Disregard - just got an email back from Whiteline, and the correct spec is 106-110 ft lbs. The instructions are wrong.

Dezoris 05-29-2014 01:48 PM
Quote:
Originally Posted by jonnyozero3 (Post 1766097)
Anyone know what the correct torque spec is for the Whiteline KCA416 camber bolts in a BRZ?

The installation instructions say 83 ft-lbs/113 Nm, but there is a sticker on each individual bolt bag that says torque to 106 lb-ft/144 Nm with a dire warning not to over-torque.

Anyone know which is correct?
The OEM bolts are 114.3lbs, I torqued the Whiteline (SPC) camber bolt to 106lbs, and had no issue aside from horrible rust.


All times are GMT -4. The time now is 04:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.