Originally Posted by Boofneenee (Post 1789884)

Before I updated my manager flkc was not reading any numbers correctly. I recently updated the manager and the numbers appeared to read normal. After running an additional log I noticed the new log is showing me +.5. I agree with an IAM of 1 it should only be reporting a negative which is the result of the ecu pulling timing. Someone in this forum mentioned earlier today that Shiv made mention of this issue and that its being resolved. I can't imagine at this point the error is something I did with updates.

E85 is almost to good to be true. The engine is more sensitive and snappy. Puts a smile on my face and my logs look legit therefore it may be good to be true. Question, I noticed that my timing is holding higher numbers to redline than with petrol. As high as ignition advance 35! This is normal correct? With this higher octane fuel the additional power is available because one can run a more aggressive map I.e. more timing. Am I learning here?

Originally Posted by Malt (Post 1789249)

You need to goto Data logging, click read and then export to CSV instead of clicking Download LOG within OpenFlash Manager. That log file is for something completely different.

Originally Posted by 355rockit (Post 1791888)

When I go to 'data logging' click 'read', I get an error that states 'File RTIME not found'. The button for 'Export' is grayed out. What is 'File RTIME'?

Originally Posted by shiv@vishnu (Post 1788823)

Another update for you FLKC lovers, OFT should now support FLKC logging all non-USDM ROMs. Hard for me to confirm this on this end but please email me (shiv@vishnutuning.com) if you are having any problems logging :)

Cheers,
Shiv

Originally Posted by Malt (Post 1792325)

While I havn't experienced that error before, maybe @shiv@vishnu can lend a hand here. If you can't wait for a response from him email sales@vishnutuning.com and I'm sure someone there can help out.

If you'd like an educated guess I'd say try installing the windows 8 patch off shiv's download section. Another guess is are you sure you actually data logged anything? You have to click start and stop on the OFT to get the log file to generate in my experience. Let us know if either of these worked for you, if not send an email and they'll get you fixed up in a jiffy.

Originally Posted by steve99 (Post 1789826)

Sounds like a scaling offset problem

if you iam is one flkc should be zero or negitive value on knock

if your iam is less than one then flkc can be positive

so if your seeing iam is one and flkc positive it some kind of scaling error

try updating your oft via ofm and ofm should be latest ver 1.08.3

Originally Posted by Vmax911 (Post 1792953)

Sorry, reads .5 on the tablet but is actually -.5 in the log file.

Originally Posted by 355rockit (Post 1793942)

I was able to log a run with the OFT for the v1.59 B01C Stage 2 UEL tune. I have FT86SF catted UEL headers and TRD intake. I attached the log if anyone is interested in viewing it.

Originally Posted by Boofneenee (Post 1794255)

You should upload to datazap to make it easy for viewing.

Originally Posted by Boofneenee (Post 1794255)

You should upload to datazap to make it easy for viewing.