TC105N or RPF1 17x9 - Brake clearance
 

Looking at purchasing a couple of sets of one of these wheels for the track car.

My main worry is that my brakes won't fit the RPF1's.

I was going to run Essex Sprint brakes, but Ive just been offered a deal from Endless NZ for fronts and rears for only marginally more than the sprint kit will cost. Problem is, no one else on here (I don't think?) is running Endless brakes.

Looking at the sprint bbk on rpf1s, they seem quite tight, and looking at the endless template, the caliper is thicker than the sprint. So I think the tc105n is really my only option. Although, it has been suggested to me that a 17x9 +45 rpf1, with a 10mm spacer has more clearance than a +35 rpf1.

Ideally, if someone has either the tc105n or rpf1 and could measure the template against the wheel, shucks Id be so gosh darn grateful.

Front template
http://endless-sport.co.jp/brake_cal...ttern/M4-1.pdf

Rear template
http://endless-sport.co.jp/brake_cal...ttern/S2-1.pdf

For anyone interested, these endless brakes look pretty decent. Front weight savings appear to be more than essex enduro, but not quite as good as sprint. Rears also save weight too. Fronts are two piece disk floating. Details and weights are vauge at this point. Hopefully get more info today.

Found the info I was after by searching a bit more. :D

Want to post your results ;)