Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Member's Car Journals (https://www.ft86club.com/forums/forumdisplay.php?f=40)
-   -   jdmblood build thread (https://www.ft86club.com/forums/showthread.php?t=66359)

jdmblood 05-21-2014 07:47 PM
jdmblood build thread
 
3 Attachment(s)
UPDATED:

mod list:
ft86speedfactory v2 single exit catback
enkei pf01 17x8 +45 w/ 225/45/17s
sharkfin antenna
tein street basis coils
20% tint all around
shift knob (wc lathe werks)
spc lower control arms
stainless steel brake lines
fedoro track pads
toms tailights

Car is pretty much done for the time being...


ill try to update this thread more often with just random pictures I take of other cars and events i go to.
enjoy :burnrubber:

alpine 05-21-2014 07:55 PM
subbed for just about ALL the future mods

Lonewolf 05-21-2014 08:38 PM
You have good taste in wheels!

jdmblood 05-21-2014 08:51 PM
gracias! and future mods shall remain top secret :cool:

Sportsguy83 05-21-2014 08:55 PM
Quote:
Originally Posted by alpine (Post 1752084)
subbed for just about ALL the future mods
Quote:
Originally Posted by jdmblood (Post 1752186)
gracias! and future mods shall remain top secret :cool:
I'm loving your future mod upgrade list more than anything. You are going to make tremendously serious power and will have the rubber to put it down...


Car looks good man.

jdmblood 05-21-2014 09:18 PM
Quote:
Originally Posted by Sportsguy83 (Post 1752194)
I'm loving your future mod upgrade list more than anything. You are going to make tremendously serious power and will have the rubber to put it down...


Car looks good man.
that's the idea behind the lift kit. Be able to fit 26 inch spinners with some 265/55/26. And its not like my car doesn't already make tremendously serious power anyways haha

Sportsguy83 05-21-2014 10:01 PM
Quote:
Originally Posted by jdmblood (Post 1752230)
that's the idea behind the lift kit. Be able to fit 26 inch spinners with some 265/55/26. And its not like my car doesn't already make tremendously serious power anyways haha
More like 375/55/26... Damn the possibilities...

jdmblood 05-21-2014 10:25 PM
Quote:
Originally Posted by Sportsguy83 (Post 1752301)
More like 375/55/26... Damn the possibilities...
changing the game up!

jdmblood 05-31-2014 10:35 PM
http://i1292.photobucket.com/albums/...ps08777933.jpghttp://i1292.photobucket.com/albums/...psc8e156da.jpghttp://i1292.photobucket.com/albums/...psaf5b5522.jpg
http://i1292.photobucket.com/albums/...pse0164ef0.jpg

jdmblood 05-31-2014 10:38 PM
just got home from formula d. got a few more pics but they arent of 86s so idk if itd be cool to post here but whatever enjoy guys

jdmblood 07-18-2014 07:21 PM
2 Attachment(s)
just a few photos i took today. i got toms and convex mirrors which you can see in the second pic. the left tailight has been giving me problems with an incredible amount of water leaking into it even though this is my third replacement lmaoo..:iono:

jdmblood 07-18-2014 07:25 PM
1 Attachment(s)
i went with a +45 offset on the enkeis and at first i was regretting it because i think if i lower the car even more it will suck the wheels into the fender more as I was kinda looking for a more flush look but after looking at it over again its not that bad

J.C. 07-19-2014 04:50 PM
I have +44 offset wheels and was thinking the same thing.. my car is almost 2" lower and I found that 10mm spacers in the rear helped. Fronts are fine imo

jdmblood 07-19-2014 06:55 PM
Quote:
Originally Posted by J.C. (Post 1855011)
I have +44 offset wheels and was thinking the same thing.. my car is almost 2" lower and I found that 10mm spacers in the rear helped. Fronts are fine imo
ok sounds good. this is all if i decide to lower it even more anyways which prolly wont even be soon


All times are GMT -4. The time now is 12:20 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.