FS: Robispec Radiator (Massive radiator and liquid to liquid oil cooler in one)
 

I am selling the radiator only, no Sandwich plate.

The Robispec radiator is one that includes radiator and liquid to liquid oil cooler in one. Liquid to liquid is the best solution for oil cooling.

Retails for $1100 + shipping, will let it go for $600+ shipping.

This is V. 2 of this cooling solution, meaning its the latest and newest.

No pic as it is still installed in the car.

I will include the fittings for the lines BTW, just need new line on the top one (bottom one line is good) and a sandwich plate

( $129 for Mocal Non-Thermostatic BRZ/FRS Sandwhich Plate) and good to go. Since this is a liquid to liquid Oil cooler, it does NOT require a thermostatic plate, the coolant temperature will bring the oil to operating temperature.

I have had no problems with it, works ridiculously good. I've done 35 dyno passes including 6 back to back to back and not ever did I see an oil temperature over 225 F. Same thing doing log runs on the street back to back to back six times, that means not allowing air to help with cooling because it was running/stopping/running/stopping and again never more than 225 F.

I am going in a different direction with the car cooling.

Before install

https://lh4.googleusercontent.com/-1...0/IMAG1088.jpg

http://i240.photobucket.com/albums/f...psc593f790.jpg

https://sphotos-b.xx.fbcdn.net/hphot...27373216_n.jpg

I will include the fittings for the lines BTW, just need new line on the top one (nottom one line is good) and a sandwich plate

($160 from Mocal) and good to go.

CHEAP cooling upgrade!!

BIG radiator AND Oil cooler, for way less than $1000....

Damn, this is exactly what I am looking for, but a month from now. GLWS.

What cooling route will you be going?

Thanks. If its still available by then its yours.

Locally made Rad and homemade oil cooler.

I would happily pick this up then. I've got a clutch, driveshaft, pump, injectors, flexfuel kit, supercharger kit, pads, lines, fluids, and other things to install in the next 2-3 weeks. i'm overwhelmed until after that, but if you've still got it then consider it sold.

Perfect. We'll keep in touch in the next few weeks.

How much would you ship to 89146?

In the same boat as the other guy, but subbed in case you still have this in a few weeks!

Will PM you a quote to night

Sent from my SM-N900A using Tapatalk

Looking to Buy
 

Shipping quote via PM to 75088 commercial.

:thanks:
Thanks for the thousands of hours u've devoted to make the FT86club the best forum on the web.

Mocal FA20 non-thermostat last price I heard was $129. If someone gets to this before me I'll PM the source that quoted me the price.

Thanks for the kind words. I'm honestly just glad to help people out.

Thanks for the Non-thermo plate quoted price!


I Pm'd you a quote.

so all we need is a sandwich plate and a top line and it will be functioning?

Yes, Pm'd.