Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Perrin New Parts! (https://www.ft86club.com/forums/showthread.php?t=66203)

tonytduc 05-19-2014 10:37 PM
Perrin New Parts!
 
http://perrinperformance.com/i-18067...-fr-s-brz.html

http://perrinperformance.com/i-15768...-fr-s-brz.html

Anybody have them yet? How are they? Thanks

FR-S Matt 05-19-2014 10:40 PM
Oh nice, they finally came out! I love my crank pulley. Need to finish the set now.

tonytduc 05-19-2014 10:42 PM
Quote:
Originally Posted by FR-S Matt (Post 1747371)
Oh nice, they finally came out! I love my crank pulley. Need to finish the set now.
Me too!

JDB 05-19-2014 11:10 PM
I have the steering lockdown for a few days now....huge improvement. Instant response, and no slop. Well worth it!

Freeman 05-19-2014 11:17 PM
Quote:
Originally Posted by JDB (Post 1747447)
I have the steering lockdown for a few days now....huge improvement. Instant response, and no slop. Well worth it!
Second this.

PERRIN_Mladen 05-21-2014 12:49 PM
I'm happy to hear that everyone is excited about the parts!

As always, shoot me a PM if there's anything I can help with.

:burnrubber:

Herndon 05-21-2014 12:51 PM
I've seen the lockdown on there for a bit. What be the difference between those and stiffer/solid bushing. Besides have to press the bushing in?

DAN_BRZ 05-21-2014 01:32 PM
just ordered the accessory pulley kit... i have @PERRIN crank pulley already as well as many other parts (complete exhaust, engine mounts) and i can say the quality and customer service is top notch. i normally deal with molly but have dealt many times with @PERRIN_Mladen great ppl to deal with.

jm1681 05-21-2014 01:33 PM
Alignment required after installing the Steering Lockdown?

PERRIN_Mladen 05-21-2014 01:57 PM
Quote:
Originally Posted by jm1681 (Post 1751117)
Alignment required after installing the Steering Lockdown?
No, an alignment is not required after install.

STS-V 05-21-2014 03:20 PM
Any benefit from the accessory and crank pulley?

ramiram1984 05-21-2014 03:46 PM
1 Attachment(s)
In red.

steering lock-down feels much better as well. correct, no alignment needed.

ramiram1984 05-21-2014 04:32 PM
Quote:
Originally Posted by DAN_BRZ (Post 1751114)
just ordered the accessory pulley kit... i have @PERRIN crank pulley already as well as many other parts (complete exhaust, engine mounts) and i can say the quality and customer service is top notch. i normally deal with molly but have dealt many times with @PERRIN_Mladen great ppl to deal with.
ditto, they are good at taking care of their customers.

PERRIN_Mladen 05-22-2014 02:15 PM
Quote:
Originally Posted by STS-V (Post 1751355)
Any benefit from the accessory and crank pulley?
It somewhat has the same effect as the crank pulley. The kit decreases rotational mass from the engine. However, it will not be as noticeable as the crank pulley itself.

It also makes the engine bay look pretty. That by itself is enough to buy them ;) :happyanim:


All times are GMT -4. The time now is 02:54 AM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.