Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   SAFE?:running nokya yellow bulbs in factory foglight housing (https://www.ft86club.com/forums/showthread.php?t=65144)

jbsali 05-06-2014 04:29 AM

SAFE?:running nokya yellow bulbs in factory foglight housing
 
i wanted to upgrade my factory fog lights on my brz limited to h11 housings. I ordered a pair but i wasn't happy with the quality of them so i am looking to return them.

I'm looking at running a Nokya Hyper Yellow PSX24W (OEM Size) in my standard brz Foglights (Plastic Lense). I believe the bulbs are 24w but may run hotter due to yellow coating on the bulb. Do you guys think these will melt my factory housing lenses?

Any help would be greatly appreciated! Thanks guys

MyEvilMonkeys 05-06-2014 09:40 AM

I can't say for sure on your specific housings, but I have ran that exact stage 1 bulb in a corolla, tacoma, tc1, tc2 and currently in the FRS with zero issues. but all of them had glass lenses. But the housings were all plastic. I would not even consider the stage 2 due to lens and wiring issues.

SkAsphalt 05-06-2014 01:23 PM

Why didn't you just upgrade to the forester fogs which are glass? same price if not cheaper than most other 3rd party set ups for the twins

jbsali 05-06-2014 06:51 PM

Quote:

Originally Posted by SkAsphalt (Post 1718771)
Why didn't you just upgrade to the forester fogs which are glass? same price if not cheaper than most other 3rd party set ups for the twins

i tried out the diode dynamics fogs and i didn't like the housing of them. the chrome reflective lens was pushed back to far and the rest of the interior housing was black. a little misleading from the pictures they had posted.

I would look into another glass housing but i would have to buy h11 nokya bulbs too. if i just buy the nokya psx24w bulbs, i won't have to bother upgrading the lenses.

norcal_brz 05-06-2014 06:56 PM

The bulbs should be fine and won't melt the factory lenses. I currently have them in my brz

jbsali 05-07-2014 04:43 PM

Quote:

Originally Posted by norcal_brz (Post 1719605)
The bulbs should be fine and won't melt the factory lenses. I currently have them in my brz

thanks @norcal_brz!!

eSOLOR 06-25-2014 01:17 AM

Quote:

Originally Posted by norcal_brz (Post 1719605)
The bulbs should be fine and won't melt the factory lenses. I currently have them in my brz

Do you have any pics of the light output? I just ordered these.

ShutterSpeed 06-25-2014 02:25 AM

Who needs yellow fogs when you can just go all out and rock yellow headlights like me.

amazingbrz 07-01-2014 04:51 PM

this might seem like a dumb question but would it be the H11 or H16 for the BRZ because I thought I saw another post saying the foglight might be different size between FRS and BRZ

Thanks

chas3wba0 07-01-2014 04:55 PM

Quote:

Originally Posted by jbsali (Post 1718247)
i wanted to upgrade my factory fog lights on my brz limited to h11 housings. I ordered a pair but i wasn't happy with the quality of them so i am looking to return them.

I'm looking at running a Nokya Hyper Yellow PSX24W (OEM Size) in my standard brz Foglights (Plastic Lense). I believe the bulbs are 24w but may run hotter due to yellow coating on the bulb. Do you guys think these will melt my factory housing lenses?

Any help would be greatly appreciated! Thanks guys

It's been done:
http://www.ft86club.com/forums/showthread.php?p=1504313

Dr. BRZ 07-01-2014 06:30 PM

The only modification with the nokya h11 is you have to shave off the tabs.

calibrz 07-01-2014 07:26 PM

Quote:

Originally Posted by MyEvilMonkeys (Post 1718375)
I can't say for sure on your specific housings, but I have ran that exact stage 1 bulb in a corolla, tacoma, tc1, tc2 and currently in the FRS with zero issues. but all of them had glass lenses. But the housings were all plastic. I would not even consider the stage 2 due to lens and wiring issues.

same here.. i have Nokya h11 yellow stage 1 on my fog light..love it

chicagokid 07-13-2014 12:42 PM

Most Nokia runs on 55 watts. You might (or be on the safe side) need a ceramic harness which u can buy on amazon for $12.00. Those will handle high heat.
[ame="http://www.amazon.com/iJDMTOY-Ceramic-Harness-Sockets-Headlights/dp/B008DWKF98/ref=sr_1_1?ie=UTF8&qid=1405265970&sr=8-1&keywords=h11+harness+adapter"]Amazon.com: iJDMTOY H11 H8 Heavy Duty Ceramic Wiring Harness Sockets For Headlights or Fog Lights: Automotive[/ame]


All times are GMT -4. The time now is 06:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.