Plate Holder
 

Hey Guys,

I was wondering if anyone new the Bolt size and thread pattern used for the Front License Plate holder. I have access to a Machine shop and welder and wanted to make at least one for myself and save the $$$

Thanks

You shouldn't eat and drive.

:)

@ Tahdizzle yo no food in the new car unless it has a customized plate holder

but seriously anyone know this bolt? I could make plate holders for under $10 instead of buying one

Im not sure what the threading is like on the bolt. I know someone fabricated a tire trailer using modified rear screws for a trailer hitch.

I think that thread is in the track area.

You have a tow hook in your trunk, next to the spare. You can have them use that as a template, I think.

This..

M16x1.5?

http://www.ft86club.com/forums/showt...hlight=towhook

Someone used the tow hook from the trunk and made a plate holder out of it:

http://www.ft86club.com/forums/showt...hlight=towhook

nice :clap:

Sweet thanks guys. I'm going to make some of these up. I'll post some pictures. Will rubberize them as well.