|
TRD rear lip measurement
Hi guys,
Does anyone know what's the wide of the rear lip where the exhaust exits? It's to see if a 4 inch quad tip will fit. Regards Daniel |
Nobody knows?
|
i asked this question to another member who has the trd trim and he had 4" quad, so yours should work
http://www.ft86club.com/forums/showthread.php?t=55915 Chutrain was who I am referring to. |
1 Attachment(s)
Thank you for the answer :)
I have a milltek exhaust and I just want to change the tips as I get the TRD rear lip. The wide of the quad tip is 8.5''. Sorry for my english. I m from Switzerland (i speak french) :) |
1 Attachment(s)
This is how the quad 4'' tips looks:
|
Bump
|
Up
|
1 Attachment(s)
The hole in the TRD rear bumper is 9.5 inches across at the centerline of the tips. The hole gets larger as it gets lower. The TRD quadtips are 7 inches from side to side. Hope this is what you were looking for. :thumbsup:
|
I should of gotten quad tips.
|
| All times are GMT -4. The time now is 04:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.