Torque APP results
 

Performance Mod List:
SRT Exhaust
Injen Intake
Perrin Pulley

So' today I purchased the torque app available in the play store. Since my car has never been dynoed before I thought i would give it a go, and see a rough idea of how many ponnies I was shooting out of my exhaust.

This were my results:
147whp @ 7239 RPM
121 of torque @ 5344 RPM

Now, to be fair I did recently reset my ecu, but I was sure to drive about 70-100 miles before doing this test. I'm no expert, but it seems something is faulty. I'm well aware that I need to take this results with a grain of salt, but ever since i reset ECU everything about the car feels sluggish. Really LAZY !

Any Suggestions?
:burnrubber:

Why did you reset the ECU?

Because of the intake installment

Sent from my Nexus 5 using Tapatalk

BTW this was a 3rd gear pull.

Sent from my Nexus 5 using Tapatalk

Did you allow the car to idle for a minute before touching the accelerator after the reset? If not, the cams haven't calibrated and would be disabled. Also before firing up the engine but with the ignition on, push the accelerator fully to the floor 5/6 times.

The torque app is never going to be accurate either.